Gps Data; Use Gps Data; Landmarks - Nokia 002C9N1 User Manual

network. Contact your service provider for information about
data transmission charges.
To purchase and download travel guides, or to view
downloaded ones, select
To browse travel guide categories, select a category, and
press the scroll key. If there are subcategories, select a
subcategory, and press the scroll key again.
To download a new guide to your device, scroll to the desired
guide, and select Yes. You can pay for the guides through a
credit card or in your phone bill, if supported by your service
provider.

GPS data

Select Menu Tools
> >
With GPS data, you can view your current location, find your
way to a desired location, and track distance.
Select Navigation to view navigating information to your
trip destination, Position
about your current location, or
travelling information such as the distance and duration you
have travelled, and your average and maximum speeds.
The application must receive positioning information from at
least three satellites to be used as a travelling aid.
The trip meter has limited accuracy, and rounding errors may
occur. Accuracy can also be affected by availability and quality
of GPS signals.
© 2007 Nokia. All rights reserved.
Options Extras > Guides.
>
GPS data.
to view positioning information
Trip dist. to view your

Use GPS data

To check the signal strength of the satellites that provide the
positioning information necessary for navigation, open any
of the three views and select
To set a landmark or location as the destination of your trip,
select Navigation Options
>
also enter the destination latitude and longitude
coordinates.
To remove the destination set for your trip, select
Navigation Options
>
To save your current position as a landmark, select
Navigation or Position, and
To activate the trip meter, select
Start. To stop the trip meter, select
To reset all fields and start calculating the trip again, select
Trip distance Options
>
To change the measuring system in use, select
Settings Measurement system
>
To enter the altitude calibration to correct the altitude
received from the positioning satellites, select
Settings Altitude calibration.
>

Landmarks

Select Menu Tools > Landmarks.
>
Landmarks are coordinates to geographic locations that you
can save to your device for later use in different location-
Options Satellite
>
Set destination. You can
>
Stop navigation.
>
Options Save position.
>
Trip distance
>
Options > Stop.
> Restart.
Options
Metric or Imperial.
>
Options
status.
Options
>
>
>
89