Restore Original Settings; Telephone Settings; Call Settings - Nokia 002C9N1 User Manual

protects your SIM card against unauthorised use and is
provided with the SIM card. After three consecutive incorrect
PIN code entries, the code is blocked, and you need to use the
PUK code to unblock it before you can use the SIM card again.
To set the keypad to lock automatically after a defined period,
select Phone and SIM card
To set a time-out after which the device is automatically
locked and can be used only if the correct lock code is entered,
select Phone and SIM card
a number for the time-out in minutes, or select
off the autolock period. When the device is locked, you can
still answer incoming calls, and calls may still be possible to
the official emergency number programmed into your
device.
To set a new lock code, select
code. The preset lock code is 12345. Enter the current code
and then the new code twice. The new code can be 4-255
characters long. Both alphabets and digits can be used, and
both uppercase and lowercase alphabets are possible. The
device notifies you if the lock code is not properly formatted.
To set the device to ask for the lock code when an unknown,
new SIM card is inserted into your device, select
SIM card Lock if SIM card
>
a list of SIM cards that are recognised as the owners cards.

Restore original settings

To restore the original device settings, select
settings. To do this, you need your device lock code. After
resetting, the device may take a longer time to power on.
© 2007 Nokia. All rights reserved.
Keypad autolock period.
>
Phone autolock period. Enter
>
None
Phone and SIM card
Phone and
changed. The device maintains
Factory
Documents, contact information, calendar entries, and files
are unaffected.

Telephone settings

Select Menu
Select from the following:
Call — Define general call settings.
•
Call divert
to set •
divert", p. 36.
Call barring
•
barring", p. 37.
Network
•
Lock
>

Call settings

To display your phone number to the person you are calling,
select Call
>
determine whether your caller ID is sent, select
network.
To display your net call address to the person you are calling
using a net call, select
Yes.
To be notified of a new incoming call while you have a call in
progress, select
Activate. To check if the function is active on the network,
select Options
Tools Settings > Phone.
> >
— Define your call divert settings.
— Define your call barring settings.
— Adjust the network settings.
Send my caller ID > Yes. To let the network
Call Send my internet call ID
>
Call Call waiting
>
Check status.
>
See "Call
See "Call
Set by
>
Options
> >
115