Table of Contents
Advertisement
If your SIM card supports this func on, you can bar dialing selected phone numbers. When this op on is
on, the numbers can't be dialed in the current barred dialing list.
Note: you need to enter PIN2 code to switch on this func on, please contact your network operator to
acquire PIN2 code. A er switching on Barred Dial op on, the barred number will not be displayed in
the phone book.
Change Password
The change password feature allows you to change your current PIN2 PIN1 password to a new one. You
must enter the current password before you can specify a new one.
Note: To successfully change password, the above entered password must be digits between 4 digits
(including 4 digits) and 8 digits (including 8 digits) then press "OK", or enter any digits no more than 8
digits (including 8 digits) then add # at the end.
11.5.2 Phone Lock
Mobile phone lock can prevent your mobile phone being illegally used.
to change your current phone password to a new one. You must enter the current password before you
can specify a new one.
Note: The password is factory set to 0000, please replace it with your own password as soon as
possible.
11.5.3 Auto Keypad Lock
In standby mode, unlock your phone according to the interface prompt.
By the way, if keypad lock me has been set up in the "Keypad lock" op on, then, when a corresponding
period of me passes and the phone receivies none opera on instruc ons, keypad will be automa cally
lock up.
11.5.4 Change Password
32
Advertisement
Table of Contents
