Spectris Arcom VIPER Quick Start Manual page 9

VIPER RedBoot and AEL Quickstart
What peripherals are supported?
Linux supports the following peripherals in this release:
•
5 UARTs, COM1 through COM5, including the processor's internal FFUART,
BTUART and STUART.
•
On-board Flash array.
•
CompactFlash+.
•
Ethernet interface.
•
Audio.
•
A variety of flat panels, including the supplied flat panel running at 320 x 240
(optional).
•
Touchscreen.
•
Power management.
•
GPIO.
•
Real time clock.
•
SRAM.
•
USB host controller.
•
PC/104 bus. Drivers are available for a range of Arcom and third party PC/104
boards.
© 2005 Arcom Issue D
Getting started
9