Spectris Arcom VIPER Quick Start Manual page 11

VIPER RedBoot and AEL Quickstart
6 Switch on the VIPER board once the terminal emulator is set up on the host PC.
What happens next depends on whether you have a basic RedBoot Development
Kit, an AEL Development Kit or a CYCLOPS:
•
If you have a RedBoot Development Kit, you are dropped to the RedBoot
command prompt, where you can upload and execute your application. For
more information see page
/manuals/ folder on the Development Kit CD.
-or-
•
If you have an AEL Development Kit or CYCLOPS, the Linux operating system
is loaded from the on-board Flash array, and the board displays a Linux
prompt.
For a description of AEL see page
in the /manuals/ folder on the Development Kit CD.
© 2005 Arcom Issue D
Unpacking and connecting up
13 and the AEL Technical Manual, which is in the
15 and the AEL Technical Manual, which is
11