Advertisement
Read this manual carefully before use, and retain it for future reference.
For the first use, please remove the protective film, then place the device in the charging case and close it. Open the case again to use the device.
Place the earbuds in the charging case slot, the magnets will attach automatically.
Gently twist the end of the ear hook downward along the outside of the ear to adjust to the best fit.
During pairing, the white light flashes slowly; after successful pairing, the white light stays on for 5 seconds then turns off; if there is no device pairing for 1 minute, the indicator light turns off.
Keep both earbuds in the box, press and hold for 2 seconds until the white light flashes slowly to enter pairing mode, then you can connect to a second device.
Note: Dual device connection is off by default, if you need to use it, please turn on this function in the Xiaomi Earbuds App.
Connection loss: Earbuds more than 10 meters away from the device. Interference disconnection: Many wireless devices nearby, strong environmental interference. Manual disconnection: Place both earbuds in the case and close the lid, or manually turn off the device's Bluetooth.
Press and hold for 10 seconds until the orange light flashes three times
Note:Gesture operations can be customized via the Xiaomi Earbuds App.
Note: During the connection process, please make sure that the smartphone's Bluetooth is enabled. Put the earbuds into the charging box, open the lid, and ensure that your smartphone is near the box.
*Xiaomi Earbuds app supports mobile phones with Android 6.0 and above and iOS 14.0 and above.
*Please upgrade the app to the latest version.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the OpenWear Stereo and is the answer not in the manual?
Questions and answers