Page 2
Product Overview Read this manual carefully before use, and retain it for future reference. Package Contents...
Page 3
Charging Charging the earbuds: Place the earbuds into the charging case, and the case will start charging the earbuds. Charging the case: Use a Type-C charging cable to charge the case, and the indicator light will turn off when charging is complete. Battery Level Display Press the button on the bottom of the charging case to display the battery level.
Page 4
The product is pre-installed with M-size ear tips. It is recommended to select the most suitable ear tip size for wearing, and conduct a fit test through the Xiaomi Earbuds App (Path: Xiaomi Earbuds App → More Settings → Earbud Fit Test) to ensure optimal noise cancellation and sound quality experience.
Page 5
Turning on Sleep Mode When opening the charging case, the Place the earbuds back into the charging case and close the lid, the earbuds will automatically turn on. earbuds will disconnect and go into sleep mode automatically. Connect & Pair 1.
Page 6
Press and hold the charging case bottom button for 2 seconds until the white indicator light blinks, indicating that the earbuds are ready to pair with a second Bluetooth device. Note: Dual device connection is enabled by default. If you need to turn it off, please disable this function in the Xiaomi Earbuds App.
Page 7
Restoring Factory Settings To reset the earbuds for pairing or connection issues: Delete the pairing record from your Bluetooth device, place the earbuds in the charging case with the lid open, then press and hold the button on the case for 10 seconds until the white light flashes 3 times.
Page 8
Call: Reject Music: Next track Long press for 2 seconds Transparency Noise Cancelling Swipe Gently 輕滑 Swipe up: Increase volume Swipe down: Decrease Note: You can change the gestures preferences through Bluetooth settings of the compatible device or Xiaomi Earbuds App.
Page 9
Put the earbuds into the charging box, open the lid, and ensure that your smartphone is near the box. *Xiaomi Earbuds app supports mobile phones with Android 6.0 and above and iOS 14.0 and above. *Please upgrade the app to the latest version.
Page 10
CE mark is applicable to product and built-in battery. Hereby, Xiaomi Communications Co., Ltd. declares that the radio equipment type M2430E1 is in compliance with Directive 2014/53/EU and Regulation (EU) 2023/1542. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html...
Page 11
Products which were not duly imported and/or were not duly manufactured by Xiaomi and/or were not duly acquired from Xiaomi or a Xiaomi’s official seller are not covered by the present warranties. As per applicable law you may benefit from warranties from the non-official retailer who sold the product. Therefore, Xiaomi invites you to contact the retailer from whom you purchased the product.
Page 12
FCC Compliance Statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Page 13
RF Exposure Compliance This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the FCC/ISED.
Need help?
Do you have a question about the Mi Redmi Buds 6 Pro and is the answer not in the manual?
Questions and answers