Dc Protector; Receptacle (For Yg2800I) - Yamaha EF2800i - Inverter Generator Owner's Manual

Owners manual
Hide thumbs Also See for EF2800i - Inverter Generator:
Table of Contents

Advertisement

q
e
AE00780

DC PROTECTOR

The DC protector turns off automatically when the load
exceeds the generator rated output.
cC
Reduce the load to the specified generator rated
763-188a
output if the DC protector turns off. If it turns off
again, consult a Yamaha dealer.
q
NOTE:
w
Press to reset the DC protector.
1 "OFF"
763-006
2 "ON"
AE00848
G.F.C.I. RECEPTACLE
(for YG2800i)
The G.F.C.I. (Ground Fault Circuit Interrupter) 1 shuts
w
off power to the protected receptacles if a ground fault
763-105a
(electrical leak) is detected.
If the reset button 2 pops out 3, the equipment
plugged into the receptacle may be faulty. If this hap-
pens, check the equipment carefully. If the equipment
appears to be in good condition, press the reset button
firmly until a click is heard. This will restore power. If
the reset button pops out again, unplug the equipment
immediately. Have the equipment inspected and
763-060a
repaired by a qualified repairperson before attempting
to use it again.
w
TO REDUCE THE CHANCE OF ELECTRICAL
SHOCK:
9 Do not attempt to operate equipment if the
9 Test the ground fault circuit interrupter during
9 Remember
ground fault circuit interrupter reset button
pops out repeatedly during use.
the pre-operation checks according to the
maintenance instructions on page 30.
that
"GFCI" have ground fault circuit interrupter
protection.
– 11 –
only
receptacles
labeled

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yg2800iYg2800ij - industrial inverter generator

Table of Contents