Riester RVS-100 Quick Start Manual

Vital signs monitor + thermometer

Hide thumbs Also See for RVS-100:

Download this manual

RVS-100

RVS-

100

Vital Signs Monitor + Thermometer

How to connect the Bluetooth Thermometer at the RVS-100

STEP 1.

After pressing the power switch, the monitor will begin an automatic self-diagnostic test and start-up.

During this process, the monitor will check the battery status and for error messages etc. The device

will make a sound and the Riester logo will appear on the screen.

STEP 2.

After the Riester logo disappears, the monitor will display the main user interface. Press SETTINGS

and press ADVANCED tab.

STEP 3.

Enter code 13579 and press OK.

STEP 4.

You are now in the GENERAL tab. Press SERVICE (Bottom Left).

STEP 5.

Press the FACTORY tab.

STEP 6.

Enter code 02468 and press OK.

Quick Start Guide

Need help?

Do you have a question about the RVS-100 and is the answer not in the manual?

Page 1 During this process, the monitor will check the battery status and for error messages etc. The device will make a sound and the Riester logo will appear on the screen. STEP 2. After the Riester logo disappears, the monitor will display the main user interface. Press SETTINGS and press ADVANCED tab. STEP 3.
Page 2 When the warning message, pop up appears, press OK and then press Apply. A pop up note will appear. Press OK button again. STEP 9. Turn monitor off and rstart the RVS-100. A warning note will appear, press OK. STEP 10. Press SETTINGS and press ADVANCED tab.