QCY H3 Pro Manual
Also See for H3 Pro:

Advertisement

QCY H3 Pro Manual

Before Using

For better using experience, please scan to download QCY app before start-up.

Overview

Overview

Packaging List


The picture is only for reference, please make the object as the standard.

How to Connect

Power on headphones and it will auto turn connectable. On phone, search for QCY H3 Pro and tap to connect.(It will auto reconnect to the last device in connectivity record, if any. If you need to make it connectable again, power it off and press and hold MFB for 4s.)
How to Connect

Multi-Point Connection

(It's disabled by default and needs enabling on QCY APP)

Connect headphones to Device A then turn off its Bluetooth and the headphones will auto turn connectable(LED blinks red and white). On Device B, search for QCY H3 Pro and tap to connect. Once again turn on Bluetooth on Device A and connect it to the headphones.
Multi-Point Connection

Factory Setting

Power on headphones, press and hold both volume + and - for 10s or until LED blinks red 3 times to reset it factory. It will then auto turn connectable.
Factory Setting

LED

LED

Functions

Functions

Power-on: Keep pressing MFB for 2s

Power-off: Keep pressing MFB for 4s

Answer/end call: Press MFB

Ignore call: Keep pressing MFB for 2s

Skip track backward: Keep pressing Vol- for 1s

Skip track forward: Keep pressing Vol+ for 1s

Volume up: Press Vol+

Volume down: Press Vol-

Playback/pause: Press MFB

Low-latency mode: Double press MFB

Voice assistant: Triple press MFB

ANC-ON/OFF/Transparency: Press ANC Button to switch among ANC-ON, ANC-OFF and Transparency
(When ANC is ON,double press ANC Button to turn on/off Adaptive ANC)

Safety Precautions

  1. Please carefully read and retain this user manual before using the product.
  2. If the product is not used for an extended period (more than 2 weeks), please recharge it.
  3. You must choose a charger produced by a legitimate manufacturer and certified by the national safety authority.
  4. If your phone cannot detect the Bluetooth earbuds, either re-enter pairing mode or perform a factory reset on the Bluetooth earbuds. If there is a phone program error, close and reopen Bluetooth on the phone or restart the phone.
  5. Do not disassemble or modify the battery, insert foreign objects, expose it to high temperatures, or immerse it in water or other liquids to prevent battery leakage, overheating, ignition, or explosion. Battery replacement should only be done by the manufacturer.
  6. Do not drop, crush, or puncture the battery. Prevent external pressure that may lead to internal short circuits and overheating.
  7. Do not dismantle or modify the earbuds for any reason, as it may result in fire, electronic breakdown, or permanent damage to the product.
  8. Do not expose the product to extremely low or high temperatures (below 0°C or above 45°C).
  9. Do not the product indicator light near the eyes of children or animals.
  10. Do not use the product during thunderstorms, as it may cause abnormal operation and increase the risk of electric shock.
  11. Do not use oil or other volatile liquids to clean the product.

  12. Please do not use this device for long periods of time and at high volume, as there is a risk of hearing damage.

The power delivered by the charger must be between min 2 Watts required by the radio equipment, and max 5 Watts in order to achieve the maximum charging speed

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download QCY H3 Pro Manual

Advertisement

Need help?

Need help?

Do you have a question about the H3 Pro and is the answer not in the manual?

Questions and answers

Table of Contents