PT3500 / PT3700 Location / Studio Teleprompter QUICKSTART GUIDE What’s included Camera Mount Assembly Teleprompter Base Assembly w/ Glass Hood LCD Monitor w/ Power Supply 200 mm Riser Rods x 2 PrompterPro Software DRS-01 x 2 Cork Strips x 4 5/32 Hex Key www.ikancorp.com...
Page 3
PT3500 / PT3700 Location / Studio Teleprompter QUICKSTART GUIDE STEP 1: Place Teleprompter Base Assembly on a at surface. STEP 2: You can position the glass at any angle you want but the preferable angle is 45° 713-272-8822 www.ikancorp.com...
Page 4
PT3500 / PT3700 Location / Studio Teleprompter QUICKSTART GUIDE STEP 3: Slide the Camera Mount Assembly onto the 15mm Rods. The tripod mount has 3 sets of holes that allow you to mount the plate either towards the front or rear to help balance the telepromter better.
Page 5
PT3500 / PT3700 Location / Studio Teleprompter QUICKSTART GUIDE STEP 4: DSLR CAMCORDER Attach camera to camera mount and slide to best position. Make sure all thumb screws are secure. If you require the camera to be positioned higher you...
Page 6
PT3500 / PT3700 Location / Studio Teleprompter QUICKSTART GUIDE STEP 5: Attach hood to glass frame using the integrated magnets. You can attach the optional side aps. www.ikancorp.com 713-272-8822...
Monitor Ports Monitor Menu Settings Video Config Contrast (White Level) Brightness (Black Level) Tint (Chroma Hue) Chroma (Chroma Saturation) Sharpness (Detail) RGB Setup – Manually configure RGB Return System Config Menu Duration – Set duration of how long menu stays on screen Video Ratio –...
Page 8
Checked by PT3500 / PT3700 Location / Studio Teleprompter QUICKSTART GUIDE To make your Teleprompter more portable we packed it in a reusable high quality foam. The shape and size of the foam was designed to fit into th SKB i Series 2918 waterproof case.
Need help?
Do you have a question about the PT3500 and is the answer not in the manual?
Questions and answers