Blackview Shark 9 Manual

Introduction

Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please visit our customer support page: www.alza.cz/EN/kontakt.

Device Overview

Card Management

To make sure your device is able to make calls, insert the SIM card according to the provided instructions.

First press a pin into the side hole and then the card tray pops out. Pull it out.

Take out the card tray and insert either two Nano SIM cards or a Nano SIM card and a memory card, ensuring the metal side faces downward. Align the bevel angle of the card slot with the SIM for a proper fit.
Finally, insert the card tray back into the device.

Instructions for Use

Power On
To power on the device, press the power button for 3 to 5 seconds.

Sending Text Messages and Multimedia Messages
To send a text message, open the SMS app, select "New Message", enter a phone number, or select the existing contact, enter your message into the text field, and tap on "Send".
To send a multimedia message, proceed according to the steps mentioned above, but before sending the message, select images, videos, or other files you wish to add by tapping on the multimedia icon next to the text field. After that, tap on "Send".

Language Switching
Enter the Settings app, select System > Language and Input > Language > Add a Language. There, select the language you wish to add, and once the language is added, move it to the top position.

Maintenance

• Thoroughly understand the maintenance of this device to use it more safely and effectively and extend the service life of the device as much as possible.
• If you wish to disassemble the device or its accessories, follow the instructions provided by this user guide and do not try any other way.
• Avoid dropping, knocking, or shaking your device. Rough handling of the device can cause the screen to rupture, damaging the internal circuit board and its delicate structure.
• Do not use chemical solvents or detergents to clean your device. Wipe the device case with a soft cotton cloth dampened with water and mild soap.
• Clean the lens and display, generally any glass-covered surfaces, with a clean, dry, soft cloth.
• When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overheating will shorten the battery life.

Restrictions in the 5GHz Band

According to Article 10(10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the European market. The WLAN function for this device is restricted to indoor use only when operating in the 5180 to 5240 MHz frequency range.

Safety Instructions

In order to ensure safety during use of the product, you must strictly abide by the following rules.

• The device should be at least 15 centimetres away from any medical implant or rhythm adjuster and never put the device in your chest pocket.
• Do not expose the device or other batteries to high temperatures or heatgenerating equipment, i.e., sunlight, heaters, microwave ovens, stoves, or water heaters. Overheating of the battery can cause an explosion.
• When charging is complete or when the device is not being charged, disconnect the charger from the device and unplug the charger from the outlet.
• If the device is equipped with a non-removable battery, do not replace the battery by yourself to avoid damaging the battery or the device.
• Use on an unapproved or incompatible power source, charger, or battery may cause fire, explosion, or other hazards.
• Do not disassemble or short-circuit the battery, do not insert other objects into the device, do not immerse it in water or other liquids, all in order to avoid battery leakage, overheating, fire, or explosion.
• Do not drop, crush, scratch, or puncture the battery to avoid subjecting the battery to excessive external pressure, which may result in internal short-circuit and overheating of the battery.
• The manufacturer does not bear responsibility for accidents caused by nonstandard related charging equipment.