Blackview BL8800 Pro Manual

Overview

Insertion of SIM and Memory Cards

To make sure your smartphone will be able to make and receive calls, insert the SIM card in the following order. First, insert the pad to pull out the SIM card slot. Then, take out the card tray and place two Nano SIM cards with the metal side facing down. Make sure the bevel angle is aligned with the bevel angle of the card slot and places in the corresponding card slot.

With the phone facing up, insert the card tray into the phone in the direction of the arrow.

Instructions for Use

Booting Up

Note that this phone has a non-removable battery. Press the power button for 3-5 seconds to boot up the device.

Sending SMS and MMS

To send a text message, open the SMS app, select New Message", enter a phone number or browse your contacts, select Edit Message" and enter your text. Send the message by tapping the Send icon.
To send a picture or video, select said pictures or videos alongside writing your text message.

Switching Languages

From main menu, select Settings > System Settings > Language and Input Method > Language > Language Adding. Select the language you need; the system will automatically jump back to the language interface. Select the icon corresponding with the language you want and move it up into the first position.

Tri-proof Device Performance Test

The dustproof and waterproof levels of this phone have been certified as IP68.

• Waterproof test: The water depth was within 1.5 metres, and the mobile phone has been immersed in water for 30 minutes.
• Anti-drop test: The phone had been dropped from height of 1 metre and no force had been used – the phone was falling naturally.
• Pressure test: The phone was placed on a level ground and the pressure wasn't focused on a single point.

Maintenance

Thoroughly understand the maintenance of this mobile phone to use the mobile phone safely and effectively and extend the service life of the mobile phone as much as possible.

• Please follow the instructions in the manual if you want to open the phone, disassemble the accessories, and do not try other methods.
• Please avoid falling, knocking, or shaking your phone. Rough handling of the phone can cause the screen to rupture and damage the internal circuit board and its delicate structure.
• Do not use chemical solvents or detergents to clean your phone. Wipe the phone case with a soft cotton cloth dampened with water or mild soap.
• Clean the display and lens with a clean, dry, soft cloth.
• If you encounter a problem while using the phone, making the screen unusable, the method is as follows: For a mobile phone that cannot remove the battery, please press and hold the power button for more than 12 seconds. The mobile phone will be forced to restart. After the restart, unlock the phone. If your phone has removable battery, then remove the battery, insert it again and boot up the phone.
• When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life.

Safety Instructions

In order to ensure that the product is used in a safe manner, strictly abide the following rules:

• The phone should be at least 15 cm away from any medical implant or pacemaker and never put the device in your coat pocket.
• Do not expose the product to high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens, or water heaters. Overheating the battery can cause an explosion.
• When charging is complete or the phone is not being charged, disconnect the charger from the device and unplug the charger from the power outlet.
• Do not attempt to remove or replace the battery yourself. This may cause damage to the device.
• Use of unapproved or incompatible power source, charger or battery may cause fire, explosion, or other hazards.
• Do not disassemble or reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage, overheating, fire, or explosion.
• Do not drop, crush, scratch or puncture the battery to avoid subjecting the battery to excessive external pressure, resulting in internal short-circuit and overheating of the battery.
• The manufacturer does not bear the responsibility for accidents caused by nonstandard charging equipment.

Importer
Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
www.alza.co.uk/kontakt
+44 (0)203 514 4411