Signature Hardware ELMDALE 951585 Manual

E L M D A L E
SINGLE BOWL UNDERMOUNT SINK VANITY
SKU: 951585, 951590, 951595, 951600, 951605, 951610, 951615, 951620, 951625, 951630
BEFORE YOU BEGIN
We recommend consulting a professional if you are
unfamiliar with installing bathroom �xtures and
plumbing. Signature Hardware accepts no liability for any
damage to the �oor, walls, plumbing, vanity cabinet, sink,
counter top, or personal injury during installation.
Observe all local plumbing and building codes.
Unpack and inspect the vanity for damage. If any
damage is found, contact our Customer Relations team
at 1-866-855-2284.
GETTING STARTED
Ensure that you have gathered all the required
materials that are needed for the installation.
Ensure that your bathroom �oor is adequately
supported, and the �nished �oor is level.
Ensure that there is adequate support behind the
bathroom wall before installation.
NEVER LIFT THE VANITY TOP FLAT
For Warranty information, please visit: signaturehardware.com/services/warranty
NEVER CARRY THE VANITY TOP FLAT
1
PLANNING
Use the vanity's PDF speci�cation sheet as a reference
when planning your layout. The speci�cation sheet can
be found and downloaded from the product page on
our website.
Because the vanity speci�cation measurements are
approximate and slight variations may occur, we highly
recommend performing any rough-in procedures with
the vanity on site.
TOOLS AND MATERIALS:
Marker* Tape Measure*
Neutral Cure
Stud Finder
Level Silicone Sealant
Wood Shims
Drill* Screwdriver*
Damp Cloth
*not included
REVISED 01/28/2021
CODES: 532225, 532226, 532227, 532228
532231, 532240, 532241, 532249, 532250