REMOTE CONTROL
• The remote control should be normally used within 5 meters of the front
of the product and 30 degrees of the deviation angle.
• The battery contains many heavy metals, acids and bases, etc., which may
threaten human's health; Waste batteries should be recycled separately.
Start up or shut
down oscillating
Press "+, -" to set
the wind speed
NOTE!
• Use manganese or alkaline batteries of type "AAA".
• Do not use rechargeable batteries.
• Used batteries must be recycled separately.
TROUBLESHOOTING
Problem
The machine does not work
properly after installed.
The remote does not work.
8
Startup/Standby
Switch the wind type
Turn On/Off the fast circulation
Set the timed shutdown/
reserved startup
Possible cause
The supply cord is not plugged
in or has poor contact.
The ON/STANDBY switch is not
turned on.
The battery needs replacing.
The remote is being used more
than 5 m away from the fan.
Battery
AAA battery,
not included
Solution
Make sure the plug is properly
inserted into the socket.
Turn on the ON/STANDBY
switch.
Replace the battery.
Use the remote closer to
the fan and make sure it
is pointing directly at
the display panel.
Need help?
Do you have a question about the 907512140101 and is the answer not in the manual?