Advertisement
Quick Links
Advertisement
Related Manuals for thomann the box PA-110A
Summary of Contents for thomann the box PA-110A
- Page 1 PA 110 A Active Speaker...
- Page 2 Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 22.04.2024, ID: 153568 (V3)
-
Page 3: Table Of Contents
Table of contents Table of contents General information..........................5 1.1 Symbols and signal words....................... 5 Safety instructions............................. 7 Features and scope of delivery......................10 Installation and starting up........................ 11 4.1 Tips on handling speakers......................12 Connections and controls........................13 Technical specifications........................15 Plug and connection assignment.................... - Page 4 PA 110 A Active Speaker...
-
Page 5: General Information
Our products and documentation are subject to a process of continuous development. They are therefore subject to change. Please refer to the latest version of the documentation, which is ready for download under www.thomann.de. 1.1 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this document. - Page 6 General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
-
Page 7: Safety Instructions
Safety instructions Safety instructions Intended use This device is designed for sound reinforcement. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use. - Page 8 Safety instructions DANGER! Danger to life due to electric current! A short circuit could lead to a fire hazard and risk of death. Always use proper ready-made insulated triple-core mains cable with a safety plug. Do not modify the mains cable or the plug. In case of isolation damage, disconnect immediately the power supply and arrange repair.
- Page 9 Safety instructions NOTICE! Damage to the device due to high voltages! The device can be damaged if it is operated with the incorrect voltage or if high voltage peaks occur. In the worst case, excess vol‐ tages can also cause a risk of injury and fires. Make sure that the voltage specification on the device matches the local power grid before plugging in the device.
-
Page 10: Features And Scope Of Delivery
Features and scope of delivery Features and scope of delivery Special characteristics of this active 2-way full-range speaker: 1 × 10-inch woofer Horn tweeter, beam angle 90° × 60° Power output 80 W (bass) + 50 W (treble) 2-band EQ XLR input/output Switchable low cut at 120 Hz Monitor feet for use as a floor monitor (included in scope of delivery) -
Page 11: Installation And Starting Up
Installation and starting up Installation and starting up Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. -
Page 12: Tips On Handling Speakers
Installation and starting up NOTICE! Potential property damage due to unsuitable stands! If the device is mounted on an unsuitable stand, there is a risk that the stand will fall over and cause damage. Only use stands whose maximum bearing capacity is at least as high as the weight of the device. -
Page 13: Connections And Controls
Connections and controls Connections and controls ö # ö $ ö % ö & 1 [120Hz] | Low cut switch for lowering frequencies below 120 Hz. This function reduces impact noise and also extends the service life of the woofer. ö... - Page 14 Connections and controls 11 [STANDBY] | Push-button to enable or disable power saving mode. If the speaker is in power-saving mode and receives no signal for 60 minutes, it switches to standby mode. As soon as it receives a signal, it automatically switches back to normal mode.
-
Page 15: Technical Specifications
Technical specifications Technical specifications System Active 2-way full-range speaker with built-in crossover Configuration 1 × 10-inch woofer Horn tweeter, beam angle 90° × 60° Input connections Line/microphone 1 × XLR panel socket Power supply Rubber panel plug C14 Input impedance Line 20 kΩ... - Page 16 Technical specifications Frequency range 55 Hz…18 kHz, –3 dB 50 Hz…20 kHz, –10 dB Sound pressure level (SPL), 117 dB max. Level adjustment Bass ± 10 dB, 100 Hz Treble ± 10 dB, 10 kHz Power consumption 130 W Supply voltage 115 - 230 V 50/60 Hz Fuse...
- Page 17 Technical specifications Further information Housing Polypropylene, trapezoid Colour Black Media player Effect Monitor inclination Rechargeable battery Truss-capable Wireless hand/head micro‐ phone Ways 2-way Remote control Low cut Stand flange 35 mm Design Standard PA 110 A Active Speaker...
-
Page 18: Plug And Connection Assignment
Plug and connection assignment Plug and connection assignment Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment in such a way that a perfect sound experience is ensured. Please note these advices, because especially in ‘Sound & Light’ caution is indicated: Even if a plug fits into the socket, an incorrect connection may result in a destroyed power amp, a short circuit or ‘just’... - Page 19 Plug and connection assignment XLR plug (balanced) Ground, shielding Signal (in phase, +) Signal (out of phase, –) Shielding on plug housing (option) XLR plug (unbalanced) Ground, shielding Signal Bridged to pin 1 PA 110 A Active Speaker...
-
Page 20: Protecting The Environment
Protecting the environment Protecting the environment Disposal of the packing material Environmentally friendly materials have been chosen for the packaging. These materials can be sent for normal recycling. Ensure that plastic bags, packaging, etc. are disposed of in the proper manner. Do not dispose of these materials with your normal household waste, but make sure that they are collected for recycling. - Page 21 When disposing of the device, comply with the rules and regulations that apply in your country. You can also return your old device to Thomann GmbH at no charge. Check the current conditions on www.thomann.de.
- Page 22 Notes PA 110 A Active Speaker...
- Page 24 Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de...
Need help?
Do you have a question about the the box PA-110A and is the answer not in the manual?
Questions and answers