Advertisement
Quick Links
Advertisement
Related Manuals for thomann the box TA12
Summary of Contents for thomann the box TA12
- Page 1 TA12 Active Speaker...
- Page 2 Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 29.11.2024, ID: 191412 (V3)
- Page 3 Table of contents Table of contents General information..........................5 1.1 Symbols and signal words....................... 5 Safety instructions............................. 7 Features............................... 10 Installation..............................11 4.1 Tips on handling speakers......................13 Connections and controls........................14 Technical specifications........................16 Plug and connection assignment....................21 Protecting the environment......................
- Page 4 TA12 Active Speaker...
- Page 5 Our products and documentation are subject to a process of continuous development. They are therefore subject to change. Please refer to the latest version of the documentation, which is ready for download under www.thomann.de. 1.1 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this document.
- Page 6 General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
- Page 7 Safety instructions Safety instructions Intended use This device is designed for sound reinforcement. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
- Page 8 Safety instructions DANGER! Danger to life due to electric current! A short circuit could lead to a fire hazard and risk of death. Always use proper ready-made insulated triple-core mains cable with a safety plug. Do not modify the mains cable or the plug. In case of isolation damage, disconnect immediately the power supply and arrange repair.
- Page 9 Safety instructions NOTICE! Damage to the device if operated in unsuitable ambient conditions! The device can be damaged if it is operated in unsuitable ambient conditions. Only operate the device indoors within the ambient conditions specified in the “Technical specifications” chapter of this user manual. Avoid operating it in environments with direct sun‐ light, heavy dirt and strong vibrations.
- Page 10 Features Features Special features of the device: 1 × 12-inch woofer 1 × 1.4-inch tweeter Beam angle: 110° × 90° Frequency range: 75 Hz…16 kHz 35 mm pole flange on the bottom Optional protective cover (item no. 222249) TA12 Active Speaker...
- Page 11 Installation Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
- Page 12 Installation NOTICE! Possible property damage to adjacent devices due to magnetic fields. Speakers generate a static magnetic field. This magnetic field can affect other neighbouring units and in unfavourable cases damage them. Ensure that speakers are always a sufficient distance away from sensitive equip‐ ment that may be affected by an external magnetic field.
- Page 13 Installation 4.1 Tips on handling speakers We recommend you to set up the speakers in a way, that the sound signals can reach the audi‐ ence unobstructedly. It will often be helpful to mount the speakers on tripods. Thus, the sound will be evenly spread with maximum range throughout the audience area.
- Page 14 Connections and controls Connections and controls 1 [VOLUME] | Volume control for the input. Turn the control clockwise to increase the volume. Turn it in the opposite direction to decrease the volume. Please turn the volume back to minimum before switching on the device or making connections. Then set the required volume.
- Page 15 Connections and controls 9 [LINE/MIC] | Toggles the input sensitivity for microphone or line signals. If the signals are microphone-level signals, push the switch far down with a pen; for safety reasons, it only engages at that point. Do not push in the switch if the signals are line-level signals. 10 [MIC] | The LED lights up when the sensitivity for microphone level is set.
- Page 16 Technical specifications Technical specifications 376 mm 395 mm Ø 36 mm 196 mm TA12 Active Speaker...
- Page 17 Technical specifications System Active 2-way speaker Configuration Woofer 1 × 12-inch speaker (ferrite) with 75-mm voice coil Tweeter 1 × 1.4-inch compression driver (ferrite) with 75-mm voice coil Input connections Power supply 1 × rubber panel plug C14 Signal input 1 ×...
- Page 18 Technical specifications Power consumption 800 W Supply voltage 115/230 V 50/60 Hz Fuse 115 V: 5 mm × 20 mm, 8 A, 250 V, slow blow 230 V: 5 mm × 20 mm, 5 A, 250 V, slow blow Dimensions (W × H × D) 376 mm ×...
- Page 19 Technical specifications Further information Design Standard Flange for pole stand Truss-capable Colour Black Housing material Wood Microphone input Media player Effect Monitor inclination Rechargeable battery Line input Radio microphone Ways 2-way Remote control Low cut TA12 Active Speaker...
- Page 20 Technical specifications Frequency response TA12 Active Speaker...
- Page 21 Plug and connection assignment Plug and connection assignment Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment in such a way that a perfect sound experience is ensured. Please note these advices, because especially in ‘Sound & Light’ caution is indicated: Even if a plug fits into the socket, an incorrect connection may result in a destroyed power amp, a short circuit or ‘just’...
- Page 22 Plug and connection assignment XLR plug (balanced) Ground, shielding Signal (in phase, +) Signal (out of phase, –) Shielding on plug housing (option) XLR plug (unbalanced) Ground, shielding Signal Bridged to pin 1 TA12 Active Speaker...
- Page 23 Protecting the environment Protecting the environment Disposal of the packing material Environmentally friendly materials have been chosen for the packaging. These materials can be sent for normal recycling. Ensure that plastic bags, packaging, etc. are disposed of in the proper manner. Do not dispose of these materials with your normal household waste, but make sure that they are collected for recycling.
- Page 24 When disposing of the device, comply with the rules and regulations that apply in your country. You can also return your old device to Thomann GmbH at no charge. Check the current conditions on www.thomann.de.
- Page 25 Notes TA12 Active Speaker...
- Page 26 Notes TA12 Active Speaker...
- Page 28 Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de...
Need help?
Do you have a question about the the box TA12 and is the answer not in the manual?
Questions and answers