Johannus Vivaldi 350 Quick Reference Manual

JOHANNUS Vivaldi 350
SWITCH ON
Switch on the organ with the on/off piston at the right, next to the manuals. Wait several seconds. Starting the
control functions and the settings will take some time.
The lamps of the 0 piston and the as standard set functions light up. The settings appear on the display.
OVERVIEW OF CONTROLS
A Pedal stops
B Great stops
C Display
D Swell stops
E Choir stops
F Volume control Organ
G Volume control Cathedral
H SET / ENTER
I KT: Keyboard Transfer
J Capture memory locations
K Pre-programmed memory locations
L 0: Recall / Reset
M RO: Reeds Off
N CH: Chorus
O MB : Manual Bass
P CF : Cantus Firmus
Q TRANS.: Transposer
R - and + pistons
S CR: Crescendo
T MENU
U Manual Choir
V Manual Great
W Manual Swell
X On/Off
Y SEQ- and SEQ+ pistons
Z S/S: All Swells to Swell
AA MIDI stops
AB Intonation variations
AC Intonation styles
AD Orchestral solo voices
AE Orchestral voices
ACCESSORIES
Keyboard Transfer (KT):
Keyboard Transfer is a function to switch the manuals of the Choir and the Great.
Reeds Off (RO):
Reeds Off is a function to switch off all reeds simultaneously.
Chorus (CH):
Chorus is a function for lightly detuning the organ stops to give it a broader and livelier sound.
Manual Bass (MB):
Couples the Pedal monophonic to the Great. Only the lowest key that is played on the Great is coupled from the
Pedal to the Great.
Cantus Firmus (CF):
Couples the Swell monophonic to the Great. Only the highest key that is played on the Great is coupled from the
Swell to the Great.
Transposer (TRANS.):
The Transposer function shifts the pitch by half-tone increments (from -8 to +8). The set pitch can be read on the
display (Tr:..).
- Press the TRANS. piston.
- Use the - and + pistons to set the pitch.
Crescendo (CR):
Crescendo is a piston to activate the crescendo pedal.
If no expression pedal is configured as a crescendo pedal, the CR piston cannot be activated.
Johannus Menu (MENU):
In the Johannus Menu several functions of the organ can be set.
Press the MENU piston to activate the Johannus Menu on the display.
Navigating the menu is done with the - and + pistons.
Confirmation of a choice is done with the SET piston.
Cancel or step back in the menu is done with the MENU piston.
Recall / Reset function (0):
The 0 piston cancels registration in two ways:
- A short press on the 0 piston: Only the last change is cancelled.
- A long press on the 0 piston: All registrations are cancelled.
Sequence - and + (SEQ- and SEQ+):
Sequence is a function to call up capture memory locations in a sequential way.
All Swells to Swell (S/S):
All Swells to Swell transforms the swell pedal for the Swell to a swell pedal for the whole organ.
If no expression pedal is configured as a swell pedal for the Swell, the S/S piston cannot be activated.
Intonations:
The organ has 12 intonations divided into four styles: Romantic (ROM), Symphonic (SYM), Baroque (BAR) and
Historic (HIS) and three variations per style: Standard, Solo (SOLO) and Trio (TRIO).
Quick Reference Guide