Advertisement
Quick Links
Y
Parts Included:
Flexi-rack
Tools Required:
T-20 Screw Driver
Steps:
1. Remove the two T-20 flat
head screws that secure the
Flexi-rack to the back.
Z
© 2016 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Aeron are among the registered trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
T-27 Screw Driver
Rubber Hammer
New Aeron
Screw - Flat Head
2. Screws removed.
Posturefit SL Flexi-rack
®
Replacement
Screw - Pan Head
Part no. 1BH1VZ rev B.
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for HermanMiller New Aeron Posturefit SL Flexi-rack
Summary of Contents for HermanMiller New Aeron Posturefit SL Flexi-rack
- Page 1 New Aeron Posturefit SL Flexi-rack ® Replacement Parts Included: Flexi-rack Screw - Flat Head Screw - Pan Head Tools Required: T-20 Screw Driver T-27 Screw Driver Rubber Hammer Steps: 1. Remove the two T-20 flat 2. Screws removed. head screws that secure the Flexi-rack to the back.
- Page 2 4. Remove the unit from the 3. Use a rubber hammer to back. tap up on underside of the Wishbone to disengage it from the back. 5. Remove the Posture Fit Pad 6. Remove the two T-27 pan assembly by sliding up to head screws that secure the release from the t-slot and cover of the Wishbone.
- Page 3 8. Remove the knob from 7. Remove the cover from the Wishbone. the Wishbone. 9. Remove the bevel gear from 10. Remove the Flexi-rack the Wishbone. from the Wishbone. Part no. 1BH1VZ rev B. © 2016 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A. ®...
- Page 4 12. Re-install the bevel gear. 11. Install the new Flexi- rack. 13. Re-install the knob. 14. Re-install the cover. Part no. 1BH1VZ rev B. © 2016 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A. ® Y, Z, Aeron are among the registered trademarks of Herman Miller, Inc. Illustrations and specifications are based on the latest product information available at the time of publication.
- Page 5 15. Install the two T-27 pan 16. Install the Posture Fit head screws that secure the Pad assembly by re-engag- cover of the Wishbone. ing the t-slot of the Wishbone and pivot of the Flexi-rack. 17. Press Wishbone down 18. Verify that both sides of the Wishbone are securely onto back frame engaging the two sets of snaps each side.
- Page 6 19. Align Flexi-rack bosses to holes in back frame and install the two T-20 flat head screws using a hand driver. Part no. 1BH1VZ rev B. © 2016 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A. ® Y, Z, Aeron are among the registered trademarks of Herman Miller, Inc. Illustrations and specifications are based on the latest product information available at the time of publication.
Need help?
Do you have a question about the New Aeron Posturefit SL Flexi-rack and is the answer not in the manual?
Questions and answers