Advertisement
Quick Links
Advertisement
Related Manuals for Britax ZOOM WALKER - SERIES WM-2112US
Summary of Contents for Britax ZOOM WALKER - SERIES WM-2112US
- Page 1 WM-2112US 4001008...
- Page 2 5. CLOSE/LOWER AND ADJUST WALKER HEIGHT NOTE: The child must be removed from the walker before releasing the lock to lower the walker, to avoid injury. Be sure to follow these instructions carefully to avoid the top tray falling down onto your hand. A. Remove the child from the walker.
- Page 3 A. Position the activity tray on top of the upper tray as shown and lay it down flat. B. Hold the activity down with one hand. Then from under the upper tray, push the white engagement pins up into the activvity tray cavities and turn to the right to lock into place. C. To remove, turn the pins and remove activity tray. A. 1 x Walker Frame B. 1 x Seat C. 2 x Swivel Wheels D. 1 x Activity Centre Tray...
- Page 4 A. Turn walker upside down on top of the carton. Insert A. The seat needs to be attached to the frame. There are the end of the wheel posts all the way into the six attachment points at the rear and four at the front. holes at the corner of the walker base using moderate force. B. Position the seat into the upper tray cavity. NOTE: Clean grip pads regularly, using warm water C. Begin to attach the seat from the rear by locating the with a household soap or mild detergent to maintain plastic pins over the engagement holes. One at a stopping performance. time, slide each pin into the holes and lock into position. Make sure all six pins are engaged. Pull up on the seat to confirm. Repeat steps if not locked into upper tray. D. Attach the seat to the front section. Locate the plastic pins into the holes and push down until locked. Pull down by the fabric to lock the pins if a little tight. Make sure all four plastic pins are engaged.
Need help?
Do you have a question about the ZOOM WALKER - SERIES WM-2112US and is the answer not in the manual?
Questions and answers