Download Print this page
Britax BEEPA 4 IN 1 - SERIES WA2819A3 Manual

Britax BEEPA 4 IN 1 - SERIES WA2819A3 Manual

4 in 1 walker

Advertisement

Warranty
Each Steelcraft unit is thoroughly inspected in our Quality Assurance
department prior to delivery. In the unlikely case that you find any
material or workmanship that affects the units normal operation,
we will repair the unit free of charge within 12 months of purchase.
You are required to present your receipt as proof of purchase.
For all concerns with your product please contact our Customer
Service team.
CUSTOMER SERVICE
1300 303 330 - Australia
0508 688 822 - New Zealand
Please read all the information carefully before using this product.
This warranty does not apply to failure due to improper care,
or normal wear and tear caused by product use. We reserve the
right to inspect the unit. You may be charged for repairs if the product
has been damaged accidentally.
Distributed by:
AUSTRALIA
BRITAX CHILDCARE PTY.LTD.
A Britax International company.
(Incorporated in Victoria)
A.B.N. 55 006 773 600
99 Derby Road, Sunshine,
Victoria 3020, Australia
Phone: (03) 9288 7288
Fax: (03) 9311 5798
Due to our continuing program of development, Britax reserves the right to alter the specifications,
colour or design without any further notice.
The Steelcraft trademark is the property of Britax Childcare Pty. Ltd-Australia.
The Britax trademark is the property of Britax Excelsior Limited - UK.
Visit the Britax website at: http:/www.britax.com.au or email us at custserv@britax.com.au
Due to the variations in the style and design of our products the illustrations used in this instruction
booklet are generic.
12/06
2007 Copyright Britax Childcare Pty. Ltd. Australia.
c
08
NEW ZEALAND
BRITAX CHILDCARE NZ. Limited.
A Britax International company.
101 Diana Drive, Glenfield,
Auckland 9, New Zealand.
Phone: (09) 443 0102
Fax: (09) 443 0120
4000823
KEEP INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE
series WA2819A3

Advertisement

loading
Need help?

Need help?

Do you have a question about the BEEPA 4 IN 1 - SERIES WA2819A3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Britax BEEPA 4 IN 1 - SERIES WA2819A3

  • Page 1 Phone: (03) 9288 7288 Fax: (03) 9311 5798 Due to our continuing program of development, Britax reserves the right to alter the specifications, colour or design without any further notice. The Steelcraft trademark is the property of Britax Childcare Pty. Ltd-Australia.
  • Page 2 • Do not use accessories other than those supplied and approved repairs for bent, torn, worn or broken parts. Use only those parts and accessories by Britax. approved by Britax. • Discontinue using the baby walker should any part become damaged or broken.
  • Page 3: To Adjust Height/Use Bounce Function

    Turn upper plate upside down, pull plastic seat slots over plastic molding to hold seat in place. Reverse steps A, B and C to remove seat fabric. www.britax.com.au www.britax.com.au...
  • Page 4: To Install Swivel Wheels/ Batteries

    Test correct installation by turning over foot found on left and right sides of upper plate. pedal and pressing light and sound buttons. NOTE: The car bonnet can remain uninstalled to use convenient snack tray. www.britax.com.au www.britax.com.au...

This manual is also suitable for:

Steelcraft beepaSteelcraft wa2819a3 series