Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Britax ROADSTER 2 IN 1 WALKER
Summary of Contents for Britax ROADSTER 2 IN 1 WALKER
- Page 1 24/03 2010 Copyright Britax Childcare Pty. Ltd. Australia. series WA5040E20 4001178...
- Page 2 TO DISASSEMBLE THE SEAT FRAME AND LEG SUPPORT TUBES NOTE: For safety, this product is not designed to be easily disassembled. Remove the plastic cap with a screwdriver or other tool. Use a screwdriver or other tool to press in the locking pin.
-
Page 3: Care And Maintenance
TOY TRAY FUNCTION CARE AND MAINTENANCE Right side dial is on/off and volume. When rotated clockwise from the off position, the Toy Tray will be on. The white dot indicates the maximum volume point. Left Right Make sure the dial clicks into the off position when not in use. Left side dial changes music function from music tunes to “piano”... - Page 4 PARTS LIST TO USE THE TOY TRAY NOTE: You will need 3 x AA batteries to operate the lights and sounds. 1 X Lower base frame Batteries are NOT included. 1 X Upper seat frame WARNINGS: 1 X Soft seat Non-rechargeable batteries are not to be recharged.
- Page 5 WALKER FUNCTION INSTALLING THE ADJUSTING SUPPORT LEGS NOTE: There is a left and right support leg. WALKER MODE(FIXED SEAT POSITION): NOTE: To lock the support legs from Bounce into Identify the hole in the leg moulding and align Walker mode, select one of the 3 height positions. this with the small post on the base.
- Page 6 INSTALLING THE UPPER SEAT FRAME INSTALLING AND ATTACHING THE SOFT SEAT TO THE SEAT FRAME NOTE: The soft seat must be secured to the frame by the webbing straps. NOTE: At the top of each support leg, you will notice a spring loaded pin. Firstly, raise the plastic backrest support up and lock it into position.
Need help?
Do you have a question about the ROADSTER 2 IN 1 WALKER and is the answer not in the manual?
Questions and answers