Britax ROUNDABOUT - MANUAL 2 User Manual page 20

Care and Maintenance
Harness Buckle Removal
1 Fully recline the child seat.
2 Locate the metal buckle strap retainer on the
bottom of the child seat.
3 Pull the retainer away from child seat to
loosen.
4 Turn the retainer so the short side will go
through the slot in child seat shell (Fig. A).
5 Push the retainer through slots in the shell
and cover to the top of the child seat.
Re-threading the Harness Buckle
1 Locate slot in cover and shell for harness buckle.
2 Turn the buckle retainer so the short side will go through the slot in
the cover and child seat shell Fig A.
3 Push the retainer through slots in the shell and cover, to the bottom
of the child seat.
4 Pull harness buckle away from child seat until tight and verify the
strap is not twisted and the release button is facing outward.
36
Cleaning the Harness Buckle
If a child eats and drinks while in the child seat,
the harness buckle may need to be periodically
checked and cleaned of any food, drink or other
debris.
•
•
A
•
•
•
REMOVE BUCKLE as described on page 36.
THOROUGHLY RINSE using warm water
(Fig. A).
TEST THE HARNESS BUCKLE by fastening
and unfastening until an audible click is heard
after inserting each buckle tongue (Fig. B). If
either click is not heard, repeat the cleaning
procedure.
TOWEL DRY
DO NOT lubricate, use solvents, abrasive
cleaners, soap or other household detergents
to clean the buckle.
Care and Maintenance
A
b
x 2
37