SmartGyro K2 PRO Manual

Use

1. Before the first use, charge the battery to its maximum capacity. Just look at the LED indicator on the transformer:
   Red = charging
   Green = full charge.
2. Turn on your Smartgyro by pressing the power button located on the control panel for a few seconds.
3. Select one of the 4 available speeds with a single press of the power button.
4. For safety reasons, you have to initiate the ride with your foot and then press the accelerator (A).

Scooter Schematics

1. Snap hook
2. Bell
3. Brake lever
4. Handlebar
5. Headlight
6. Reflector
7. Stem
8. Release lever
9. Charge port
10. Drum brake
11. Front suspension
12. Battery compartiment
13. Side reflector
14. Kickstand
15. Hub motor
16. Brake light
17. Rear suspension
18. Rear fender
19. Buckle
20. Folding mechanism
21. Display
22. Electronic throttle

• The cruising speed is an extra function that can be configured for the user's comfort and that means that when the accelerator is released, the skate will not reduce its speed. Use it on long straight lines without obstacles and always with caution. The cruising speed is activated or deactivated from the Smartgyro application.
• The sound emission level is less than 70 dB(A).

How to unfold your Smartgyro scooter

1. Unfold the handlebar mast and adjust it. Then unfold the kickstand to support the scooter.
   Double secure folding system
   
2. Firmly connect the wires inside the handle and mast. Slide the mango on the stem. Be aware of the correct orientation.
   
3. Install six screws (two on each side) with the included hex wrench.
   
4. Check that your scooter can be turned on and off.
   

How to turn on the lights of your Smartgyro K2 PRO

When assembling the handlebar on the mast, remember to first fix the structure with the screws WITHOUT TIGHTENING THEM HARD and once they are all correctly positioned and fitted into the structure (looking for the correct position), TIGHTEN THEM HARD to assemble the handlebar correctly.

1. To turn the skate lights on and off, you need to press the power button twice.
2. You can also turn the lights on and off through the APP.

Display

1. Pedestrian mode: pedestrian gear at 6 km/h makes it easy to push the scooter.
2. Brake: the icon indicates that the brake has been activated
3. Error: The wrench icon indicates that the scooter has detected an error
4. Non-zero start: the icon indicates that when the speed of the scooter reaches 3 km / h, press the accelerator and the engine starts working.
5. Light Switch Control: Click left button to control the light on/off
6. Lock function switch: right click on the left button 8 times to open the lock function, the lock scooter screen icon lights up and the motor cannot work in the locked state, press the left button again 8 times to unlock the scooter.
7. Speed unit switching: When the meter is on, press the right button three times to switch between units km/h and mph
8. Bluetooth: the icon indicates that the scooter has been successfully connected to the device
9. Mileage change: When the meter is on, double-click the left button to switch between individual or total mileage
10. Battery level: The battery power is indicated by 5 bars. Each accounts for about 20% of a full battery.
11. Speed gear: right-click to change the three gears 1, 2 and 3, double-click the right button to switch to the pedestrian gear, and double-click back on the original gear.1

Smartgyro app

Download the Smartgyro APP.
Download the Smartgyro APP. To do this, select your operating system (Android or Apple) and then select the Smartgyro scooter model you have purchased: Smartgyro K2 PRO.

In the APP you can turn lights on and off, activate or deactivate cruising speed and see speed, kilometers traveled, battery, etc.

Battery and Charger

Each smartGyro is equipped with a lithium battery and charger and has its own serial number. Do not replace the battery or its charger, it could be dangerous.

Lithium Battery
Please fully charge the battery before using your smartGyro K2 PRO
Charge the battery when its level is at half of the power bar to avoid influencing your driving.

Charger
The charger's overcharge protection function will automatically stop the charging process when the battery is 100% full.
Charging instructions:

1. The vehicle must be turned off during charging
2. Connect the charger plug to the mains.
3. 
   Plug the charger into a 100V-240V outlet.
4. Red light: charging in progress. Green light: charging process completed. Please always store the charger in a dry and ventilated environment.

Maintenance

• Instructions for cleaning your Smartgyro.
  If you want to keep your scooter looking like new, we recommend cleaning it after each use with a soft, damp cloth (no abrasive liquids). Then leave it in a place where it can be ventilated avoiding the corrosion of metal parts. When you clean the scooter, make sure it is turned off, unplugged from power and with the charging lid closed. You cannot clean the scooter with a pressurized water hose or submerge it in water since you could seriously damage it.
• Brake adjustment
  The front and rear discbrakes of your Smartgyro K2 PRO have two adjustment points: either through the handlebar brake lever tensioner or through the brake cable/caliper. In both cases, to be able to tighten them, you must turn the thread clockwise, and to loosen them, in the opposite direction.
• Suspension adjustment
  The suspensions do not need any kind of adjustment.
• Replace components such as brake pads, wheels, etc.
  For this we recommend you enter our website smartgyro.es, go to any of our official stores and workshops or enter our YouTube channel to see tutorials @smartGyroOficial.
• Lubrication of important parts:
  Add a small amount of grease or specific lubricant to always keep the front and rear shock absorbers lubricated and all the necessary areas of the scooter periodically from time to time to extend the life of your scooter and that it is always ready.

REMEMBER:

• Avoid obstacles and anticipate the trajectory and speed respecting the traffic code and the most vulnerable
• In any case take care of yourself and others.

Tips on Maintenance

Regular maintenance of SmartGyro skates is essential to maintain optimal performance and ensure user safety. These devices are designed with mechanical and electrical components that experience natural wear and tear with everyday use.
Preventive maintenance is key to maximizing durability and efficiency. In the case of SmartGyro, regular maintenance includes mast adjustments, steering, fastening, lubrication, tire pressure, brake pad adjustments or changes, cleaning, and other technical aspects. The maintenance interval is set by the brand every 1,000km. Sometimes, maintenance may be needed before the mentioned kilometers depending on the usage.
Regular maintenance every 1,000km helps prolong the lifespan of the skate, allowing users to enjoy their investment for a longer period.
If a user does not perform preventive checks as indicated in the product manual or the instructions provided by SmartGyro, they may find themselves in a situation where the warranty does not cover certain repairs. In no case will SmartGyro be responsible for any defects or damages that the product may have due to faulty maintenance by the customer or lack thereof.
Negligence damage: If a problem arises due to lack of preventive maintenance, it could be considered as damage caused by negligence on the part of the user. In such cases, the warranty is unlikely to cover the necessary repairs to correct the problem.
Impact on safety: Preventive checks are designed to ensure that the skates operate safely and efficiently. If a user ignores these checks and, as a result, a safety issue occurs, the warranty is unlikely to cover repair costs, as it would be considered misuse of the product.
In summary, the lack of preventive maintenance may invalidate certain parts of the product warranty. It is important for users to understand the importance of following the manufacturer's recommendations regarding maintenance to avoid any warranty coverage issues in case repairs are needed. Maintenance, as the term suggests, is never included in any warranty

• Respect the rules that affect the use of your skate, especially those of circulation, it is your responsibility. Pay special attention in dark places.
• Attention: do not use the product near water, nor use it if it is damaged.
• The vehicle is designed to be used by one user. and it has not been designed to do stunts.
• Minimum recommended user age of 16 years. Maximum user weight: 120 kg. Minimum and maximum height of the user: 120–200 cm (3'11"–6'6")
• Wear appropriate protective clothing and footwear (helmet, knee pads, elbow pads, etc. It is mandatory to wear shoes).
• Attention! Any vehicle component is subject to stress and fatigue. If the life expectancy of a component has been exceeded, it may break, causing damage and/or injury to the user. If cracks, breaks, or discoloration appear in the most stressed areas, it indicates that the component has exceeded its useful life and should be replaced.
• Attention! Keep any plastic out of the reach of children to avoid suffocation.
• Keep the user manual nearby for future reference. Take time to read the basic indications to avoid accidents that can take place in the first months.
• Avoid areas with a lot of traffic and cross the pedestrian crossing on foot.
• Notify your presence when you approach a pedestrian or cyclist who is not seeing or hearing you.
• 
  The brakes may be hot after use. VERY IMPORTANT: do not touch the disc brake.
• Eliminate any sharp edges.
• Use the parking device (side leg) when you are not using the vehicle.
• Any load on the handlebars can affect the stability of the vehicle.

• Any manipulation or modification of the skate or any of its parts, both software and hardware, will imply the loss of warranty
• Manipulation to modify the performance of the skate is expressly prohibited by law and may have legal consequences for the user.
• Make a general check of the fastening of the structure, check the pressure of the wheels and fill them in if necessary and check from time to time the fastening of the nuts. Due to movement and continuous bumps, they tend to loosen.

Please read carefully and save for future reference.

1. This scooter and all its components comply with all European safety regulations, but we recommend that you wear protective equipment and ride responsibly.
2. Each city has its own traffic regulations, we recommend that you consult them before use.
3. You can contact us at info@smartgyro.es

WARRANTY
This product has a 3 year warranty, please consult the complete conditions on our website www.smartgyro.es.

Video tutorials

If you have any problem with the operation, use or assembly of the product, you can contact us at: info@smartgyro.es/+34 91 642 95 20