Barska CB12822 Quick Start Manual

Wall Mounting
- Do not mount the lock box without anchoring to the wall
- Find the studs in the wall, at your desired location. Most studs are 16 inches or 24
inches apart
- Check the wall for concealed wires or pipes
- Measure the location of the pre-set drill holes; mark their exact position onto the wall
ensuring that the studs or anything else behind will not interfere
- Drill the appropriate size holes for the anchors you are using
- Carefully press the anchor into the holes at this time
- Mount the lock box by running screws from inside of the lock box and securing to
anchors; ensure the lock box is mounted securely.
Carry Handle Installation
Select Model Only
1. Carefully remove the two plastic plugs from the top of the lock box
2. Align the handle ends into the mounting nuts over the two openings in the lock box
3. From the inside of the cabinet, carefully feed the threaded bolt with lock washer into
each of the nuts throng the holes and tighten.
w w w . b a r s k a . c o m