Beurer HC 25 Manual
![]()
PACKAGE CONTENTS
Check that the exterior of the delivery cardboard packaging is intact and make sure that all components are present. Before use, ensure that the device and accessories show no visible damage and all packaging material has been removed. If you have any doubts, do not use the device and contact your retailer or the specified Customer Service address.
1 x Travel Hair Dryer HC 25
1 x Narrow Concentrator Nozzle
1 x Instruction Manual
PARTS AND CONTROLS
![Beurer - HC 25 - PARTS AND CONTROLS PARTS AND CONTROLS]()
- Narrow Concentrator Nozzle
- Folding device handle
- Voltage switchover
- Hanging Loop
- Power cord
- Cold air button
![]()
- Power Switch with three settings:
0 - Off
1 - Low air flow, warm air
2 - High air flow, hot air - Removable Safety Filter
- Air outlet
BEFORE USE
- Turn the Voltage Switchover to the proper voltage setting for your location. For use in North America, select "100-120 V". For use in most European countries, select "220-240 V".
- Ensure the device is switched off and then plug the power cord into an electrical outlet.
- Route the power cord safely so that there is no risk of anyone tripping over it.
TO USE
- Wash your hair as usual and then towel dry. Since hairspray is flammable, do not use hairspray while using the hair dryer.
- Stand on a dry, non-conductive surface and make sure your hands are dry.
- If desired, attach the rotating Narrow Concentrator Nozzle to the Air Outlet by pressing it into the outlet until it snaps into place. You can then rotate the nozzle as desired.
- Slide the Power Switch to the "1" (Low) position for lower air flow and warm air or to the "2" (High) position for higher air flow and hot air.
- Press the Cold Air Button for a shot of cooler air when desired, which helps set hair in place after drying. When you release the Cold Air Button, the selected power setting will resume.
- After use, slide the Power Switch to the "0" (Off) position, unplug the power cord from the electrical outlet, and let the device cool before storing. When storing, do not wrap the power cord around the device.
CARE, MAINTENANCE AND DISPOSAL
Unplug device and let cool. Disconnect the Narrow Concentrator Nozzle (if attached) and the removable Safety Filer. To ensure a long service life, clean the Filter regularly.
Wipe exterior with a soft, damp cloth. Clean attachments with water and a mild detergent solution.
![]()
- Disconnect the device from the electrical outlet before cleaning it.
- Only clean the device in the manner specified. Liquids must never be allowed to enter the device or accessories.
- Do not use the device until it is completely dry.
Storage
Keep the device in a cool and dry place out of the reach of children. When possible, store the device in its original packaging in a dry, climate-controlled environment out of direct sunlight.
TECHNICAL SPECIFICATIONS
Type | HC 25 |
Power Supply | AC 100-120 V / 220-240 V, 50-60 Hz |
Power Consumption | 800-1200 W (100-120 VAC) / 1350-1600 W (220-240 VAC) |
Operating/Storage Temperature | 14° - 104°F (-10° - 40°C) |
Weight | 18,13 oz (514 g) |
Call our US-based customer service toll free at 1-800-536-0366.
www.shop-beurer.com
Register your product today: www.registerbeurer.com or contact customer service at 1-800-536-0366.
Important Safety Instructions
READ THIS MANUAL COMPLETELY AND CAREFULLY BEFORE USING THIS PRODUCT
Keep this manual in a safe location for future reference
Signs and symbols
Whenever used, the following signs identify safety and property damage messages and designate a level of hazard or seriousness.
READ ALL INSTRUCTIONS BEFORE USING
| This is the safety alert symbol. It alerts you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. |
| Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. |
| Indicates a potentially hazardous situation, which, if not avoided, may result in minor/moderate injury. |
NOTICE | Addresses practices not related to personal injury, such as product and/or property damage. |
| Danger The device must not be used near to water or in water (e.g. in a wash basin, or in the shower or bath) – risk of electric shock! |
When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:
KEEP AWAY FROM WATER
![]()
As with most electrical appliances, electrical parts are electrically live even when the switch is off:
To reduce the risk of death by electric shock:
- Always "unplug it" immediately after using.
- Do not use while bathing.
- Do not place or store appliance where it can fall or be pulled into a tub or sink.
- Do not place in or drop into water or other liquid.
- If an appliance falls into water, "unplug it" immediately. Do not reach into the water.
![]()
To reduce the risk of burns, electrocution, fire or injury to persons:
- An appliance should never be left unattended when plugged in.
- Danger of suffocation! Keep packaging materials away from children.
- Cleaning and user maintenance must not be performed by children unless supervised.
- Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
- Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, damaged, or dropped into water. Return the appliance to a service center for examination and repair.
- Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
- Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
- Never use while sleeping.
- Never drop or insert any object into any opening or hose.
- Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
- This appliance has a polarized plug (one blade is wider than the other). As a safely feature, this plug will fit in a polarized outlet only one war. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
- Use only with electrical power as specified on the appliance.
- Do not use during a thunderstorm.
- In the event of a malfunction, shut the appliance off immediately and disconnect it from the electrical outlet. Never pull on the power cord or the device to disconnect the plug from the electrical outlet.
- Never hold or carry the appliance by the power cord.
- If the power cord is damaged, it must be replaced by the manufacturer or an authorized customer service technician.
![]()
DO NOT IMMERSE IN WATER
- Make sure that the device, the plug, and the cable do not come into contact with water or other fluids.
- Do not operate the device with wet hands, in the bathtub or shower, or in or near a swimming pool or the like.
- If the device falls into water, do not try to retrieve it. Immediately disconnect the power cord from the electrical outlet.
- Do not use an extension cord with this appliance.
- Do not direct hot air toward eyes or other heat sensitive areas.
- Attachments may be hot during use. Allow then to cool before handling.
- Do not place appliance on any surface while it is operating.
- While using the appliance, keep your hair away from the air inlets.
- Do not operate with a voltage converter.
- Be sure dual-voltage selector is in correct voltage position before operating. Before plugging in, read the information about dual voltage contained in the instruction section of this manual.
- This appliance was set at the factory to operate at 220 - 240 volts. Refer to "Before Use" section of this manual for conversion to 100 - 120 volt operation.
- As an additional safety measure, we recommend connecting the device only to a Ground Fault Circuit Interrupter (GFCI) protected electrical outlet. Contact a qualified electrician for installation details if a GFCI outlet is not available in your desired usage location. Never leave the device unsupervised, particularly if children are around.
- Be sure to repeat test every time you use the hair dryer to confirm ALCI is operational. Should the dryer go off and the ALCI reset button pop up during use, this could indicate a malfunction in the dryer. Remove plug from outlet and allow the dryer to cool. Push reset button in and reinsert plug into outlet. Dryer should function normally. If not contact an authorized distributor.
![]()
To reduce the risk of personal injury or product/property damage:
- Switch the appliance off and disconnect the power cord after every use and before cleaning.
- Keep hair, jewelry, and loose clothing away from the air inlet.
- Avoid contact with sharp or pointed objects.
![]()
IMPORTANT Message to Consumers
![]()
THIS MESSAGE ABOUT
GROUND FAULT CIRCUIT INTERRUPTERS
CAN SAVE A LIFE!
IF YOU MUST USE YOUR HAIR DRYER IN THE BATHROOM, INSTALL A GFCI NOW!
Your local electrician can help you decide which type is best for you: a portable unit that plugs into the electrical outlet or a permanent unit installed by your electrician. The National Electrical Code now requires GFCI's in the bathroom, garages, and outdoor outlets of all new homes.
Why do you need a GFCI?
![]()
Electricity and water don't mix if your hair dryer falls in water while it's plugged in, the electric shock can kill you...even if the switch is "off." A regular fuse or circuit breaker won't protect you under these circumstances. A GFCI offers you far greater protection.
A GFCI CAN SAVE YOUR LIFE! COMPARED TO THAT THE PRICE IS SMALL! DON'T WAIT...INSTALL ONE NOW!
HOW TO USE THIS ALCI (Appliance Leakage Current Interrupter)
The ALCI safety device in this unit is built into the plug. This device will make it inoperable under some abnormal conditions, such as accidental immersion in water. If the appliance is immersed in water, do not attempt to reset the ALCI safety device. The ALCI safety device is equipped with a test button so that its operation can be checked.
TO USE:
- Press the Reset button on the ALCI safety device.
- Plug your ALCI into an AC outlet then press the Test button.
- The Reset button will pop out. This verifies the safety device is operating properly. If the Reset button does not pop out, do not use the unit. Return it immediately for service.
- Press the Reset button to reactivate the ALCI safety device. Your hair dryer is ready for use.
Repeat this procedure every time you use the hair dryer to confirm that the safety device is ready and operational.
![]()
Important
The power cord of this appliance is not replaceable by the user. If the power cord of this hairdryer is damaged it must only be replaced by a qualified engineer as special tools are required.
Safety considerations
- Position the power cord so that it is not likely to be walked on or pinched by things placed on or against them.
- Do not use the hairdryer in humid or damp conditions. Do not allow the appliance to get wet i.e. dripping or splashing, as this may be dangerous.
Ventilation
- The slots and openings on the appliance are for ventilation. Do not cover or block them as it could lead to overheating.
- NEVER let children push anything into the holes or slots on the hairdryer.
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Beurer HC 25 Manual
Need help?
Do you have a question about the HC 25 and is the answer not in the manual?
Questions and answers