Advertisement
Operating your Breville Avance Premium Cookware
Before the first use
It is recommended you remove any promotional
labels and wash your frypan and lid in hot, soapy
water. Rinse and dry thoroughly.
Do not immerse the cord and/or temperature control
probe in water or any other liquid.
1. Insert the temperature control probe into the
probe socket on the appliance. then plug into a
230/240v power outlet and switch 'ON'. Always
insert the probe into the appliance first, then
plug into main power outlet.
2. Turn the dial on the temperature probe clockwise
to the desired setting. The heating 'ON' light
will illuminate.
Before inserting the temperature probe into the
frypan socket, ensure the interior of the socket is
fully dry. To do this, shake out excess water then
wipe the interior of the socket with a dry cloth.
Note
8
3. The red temperature control light will be on until
the frypan reaches the desired temperature. Once
the temperature has been reached, the red light
will cycle 'ON' and 'OFF' during cooking to retain
the desired temperature.
4. When cooking is completed, turn the dial
clock-wise until it is aligned with the 'MIN'.
Switch off at the power outlet and then unplug.
5. Leave the temperature control probe connected to
the appliance until cool.
This frypan must be used with the temperature
probe provided. Do not use any other probe
or connector.
Note
Recommended heat control probe settings
Dial setting
Uses
2-6
• keeping food warm
• basting
6-8
• slow cooking e.g. casseroles,
curries and soups
• cooking roasts
8-12
• browning nuts
• shallow frying
• pancakes and crepes
• rice and pasta
12-14
• sealing steaks and roasts
14-High Sear
• cakes and self saucing
puddings
Care and cleaning
•
Do not leave plastic cooking utensils in contact with
the hot frypan surface while cooking.
•
Before cleaning, switch the frypan to 'MIN' and
unplug from the power outlet. Remove the
temperature probe, when cooled, from the socket
in the appliance.
Temperature probe
•
If cleaning is necessary, wipe over the unit with a
slightly damp cloth.
Never immerse the temperature probe or cord in
water or any other liquid.
Note
Quantanium scratch resistant coating
Your Avance Premium Cookware features a special
scratch resistant non-stick coating that makes it safe
to use metal utensils when cooking.
Regardless of this fact, Breville recommends that care
is taken with the non-stick coating particularly when
using metal utensils.
Do not use sharp objects or cut food inside the
frypan. Breville will not be liable for damage to
the non-stick coating where metal utensils have
been misused.
Cooking on a non-stick surface minimises the need
for oil, food does not stick and cleaning is easier.
Any discolouration that may occur will only detract
from the appearance of the frypan and will not affect
the cooking performance.
When cleaning the non-stick coating, do not use
metal (or other abrasive) scourers. Wash in hot soapy
water. Remove stubborn spots with a plastic washing
pad or nylon washing brush.
Removing discolouration of the
non-stick surface
•
Combine: 2 tablespoons bicarbonate of soda,
1
/
cup household bleach, 1 cup water.
4
•
Pour into the frypan, place lid on with the vent
closed, and simmer for 5-10 minutes.
•
Clean in a well-ventilated area and avoid breathing
in the vapours. Wash as directed before re-use.
In some instances this may not remove all
the staining.
The frypan base may be washed in hot soapy
water. Dry thoroughly. The frypan base is
dishwasher safe.
Note
9
Hide quick links:
Advertisement
