Operating Your Breville Product - Breville juice fountain compact Instruction Booklet

OPERATING
your Breville product

OPERATING YOUR BREVILLE PRODUCT

1. Wash your selection of fruit and
vegetables ready for juicing.
NOTE
Most fruit and vegetables such as
small apples, carrots and cucumbers
will not need to be cut to size as these
will fit into the feed chute whole.
When juicing carrots place the tip of
the carrot into the feed chute last.
2. Ensure the juicer is correctly assembled.
Ensure the Nutri Disc™ is thoroughly
cleaned before each use (refer to care
and cleaning). Place the juice jug with
lid fitted (or glass) under spout before
commencing juicing.
3. Plug the power cord into a 110/120V
power outlet and push the ON/OFF
button to ON.
4. With the motor running, place food into
the feed chute. Using the food pusher,
gently guide food down the feed chute.
To extract the maximum amount of
juice, always push the food pusher
down slowly.
5. Juice will flow into the juice jug and the
separated pulp will accumulate in the
integrated pulp container.
NOTE
When the integrated pulp container is
full of pulp, it must be emptied before
continuing to juice.
(Refer to disassembling instructions).
Reassemble machine to continue
juicing.
WARNING
Never use fingers to push food down
the feed chute or to clear the feed
chute. Always use the food pusher
provided.
13