Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PowerPac PPBL900
Summary of Contents for PowerPac PPBL900
- Page 1 Model: PPBL900 2 3 0 2 7 1 - 2 4...
- Page 2 PARTS & DESCRIPTION (Measuring Cup) Blender Jug Blender Blade assembly Blender Blade Grinder Cup Sealing Ring Motor unit Grinder Blade Speed Buttons Grinder Blade Base assembly Non-slip Feet...
- Page 3 WARNINGS ATTENTION : Read this booklet carefully it as contains important instructions for a safe installation, use and maintenance. Important instructions to be kept for future reference. The following basic precautions should always be followed when using electrical appliances: Read all instructions before using the appliance. The Appliance This appliance must be used only for the purpose it was expressly designed;...
- Page 4 Operation If you are using the appliance for the first time, you should: Clean the exterior of the Motor unit with a damp cloth. Use a little detergent, if necessary, and wipe dry. The Motor unit may NOT be immersed in water. Wash the Cap, Lid, Blender Jug &...
- Page 5 During operation, DO NOT touch the appliance with wet body parts, and it is recommended to have between you and the standing surface, an isolating element (for example, wearing shoes with rubber soles). DO NOT soak the Motor unit in water or other liquids, wash it under the tap, or let any liquid flow into the internal casing of the appliance to prevent electric shock.
-
Page 6: How To Use
HOW TO USE Clean the Motor unit and accessories before using. Refer to the section “How to clean and maintain” immediately following this section. Place the Base of the Motor unit on a flat, dry and heat-resistant surface. The Blender Place the Sealing Ring on the inner edge of the Blender Blade. - Page 7 Wait for the blades to stop turning. ① Turn the Blender Jug (with the Blender Blade assembly) anti-clockwise until it detaches from the Motor unit. ② Lift the Blender Jug out of the Motor unit. Remove the Lid from the Blender Jug and the contents may be poured out.
-
Page 8: How To Clean
Press the ‘0’ (OFF) Speed Button. Plug the power cable into the wall socket and switch ON. Press the ‘1’ or ‘2’ Speed Button and grind (or mince) until the desired consistency is achieved. No matter whether the ‘1’ or ‘2’ Speed Button is depressed, pressing the ‘P’ (Pulse) Speed Button and holding it there will produce a short bust at maximum speed. -
Page 9: Problem Solving
/ the motor was centre for inspection. allowed to idle while in operation This is NOT covered by Warranty SPECIFICATION MODEL VOLTAGE / FREQUENCY POWER CAPACITY PPBL900 220-240V ~ 50/60Hz 350W 1.5L + 0.5L... -
Page 10: Warranty
However, if the customer still requests that the defective appliance be repaired, PowerPac Electrical Pte Ltd may, at its discretion, repair the appliance but impose a labour charge, as well as the costs of the replacement parts, to be borne solely by the customer.
Need help?
Do you have a question about the PPBL900 and is the answer not in the manual?
Questions and answers