Related Manuals for PowerPac PPBL100
Summary of Contents for PowerPac PPBL100
- Page 1 PERSONAL JUICE BLENDER with 2X BPA FREE JUGS PPBL100 Model: PPBL100 Note: These instructions must be read fully before using the product. Retain this Instruction Manual for future reference.
- Page 2 Parts & Description Blender Bottle (400 ml) Blender Blade assembly ON/OFF Switch Motor unit Base Blender Blade assembly...
- Page 3 Warnings ATTENTION : Read this booklet carefully it contains important instructions for a safe installation, use and maintenance. Important instructions to be kept for future reference. The following basic precautions should always be followed when using electrical appliances: 1. Read all instructions before using the appliance. The Appliance 2.
- Page 4 9. The packing materials (plastic bags, expanded polystyrene, etc.) must be kept out of the reach of children or disabled persons since they represent potential sources of danger. Location 10. This appliance is NOT suitable to be used or stored near heat sources (open flame, ovens, heaters, stoves, etc.) and/or in an explosive environment (in the presence of flammable substances such as gas, vapour, mist or dust, in atmospheric conditions when, after ignition, the combustion is spread in the air).
- Page 5 Attach the plug of the appliance to the wall socket and switch on. Press and hold down the ON/OFF Switch on the Motor unit and the appliance will begin operation immediately. Blend for NOT more than 1 minute without interruption, resting for 2 minutes with a maximum of 3 cycles before resting for 10 minutes.
- Page 6 17. Switch the appliance OFF before unplugging the appliance. Plug and unplug the power cable firmly holding it with dry hands. Always unplug the power cable before changing accessories; to avoid overheating; if it is NOT used for a long period and before storing, cleaning or performing any maintenance operation.
- Page 7 How to use 1. Clean the Motor unit and accessories before using. Refer to the section “How to clean and maintain” immediately following this section. 2. Place the Base of the Motor unit on a flat, dry and heat-resistant surface. 3.
- Page 8 only if a Jam occurs: DO NOT continue blending if the blade is jammed. Release the ON/OFF Switch. Switch off the wall switch and unplug the power cable. Wait for the blades to stop turning. Unscrew the Blender Bottle with the Blender Blade assembly from the Motor unit and detach.
- Page 9 How to clean and maintain 1. Release the ON/OFF Switch. Switch the wall switch off and unplug the power cable from the wall socket. 2. Before cleaning, please make sure the blades have stopped running. 3. Clean the Motor unit with a damp cloth. DO NOT immerse the Motor unit in water or other liquids, and avoid spraying water, in order to avoid damage or leakage.
-
Page 10: Problem Solving
PROBLEM SOLVING Fault symptom Cause analysis Troubleshooting Safety lock is not Reconnect the Motor unit connected and the Blender Bottle After the Blender Bottle is installed, the machine does not work after Turn the motor shaft. If it pressing the switch The motor is still does not work, please damaged or stuck... -
Page 11: Specification
DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. SPECIFICATION MODEL VOLTAGE POWER 220 – 240 V ~50 – 60 Hz PPBL100 260 W... -
Page 12: Warranty
3. This warranty does not cover the repair or replacement of part/s damaged by misuse, accidents, negligence, alterations, or modifications in any way, or repairs done by any repair organisation without the prior consent of PowerPac Electrical Pte Ltd. 4. Repair and service are to be performed at: 5 Changi South Lane #03-01 Singapore 486045. - Page 13 In accordance with the terms and conditions of this limited warranty as stated above, PowerPac Electrical Pte Ltd, at its expense shall provide free services for the appliance within the warranty period from its date of purchase from our Authorised...
Need help?
Do you have a question about the PPBL100 and is the answer not in the manual?
Questions and answers