Related Manuals for Samsung LENNOX 3WMD S6-1P Series
Summary of Contents for Samsung LENNOX 3WMD S6-1P Series
- Page 1 Mini-Split User manual 3WMD***S6-1P • Thank you for purchasing this Lennox Product. • Before operating this unit, please read this manual carefully and retain it for future reference.
-
Page 2: Table Of Contents
Contents Safety Information Safety Information Preparation Indoor Unit Overview Display Controller Overview Controller Operation Mini-split operation Initial Settings - Model Selection / Temp. Unit Setting Heating Range Operation modes • Controlling temperature • Controlling fan speed Controlling air flow direction Power smart features AI Comfort mode Auto mode •... -
Page 3: Safety Information
Safety Information California Proposition 65 Warning (US) Cancer and Reproductive Harm - WARNING: www.P65Warnings.ca.gov. Before using your new mini-split, please read this manual thoroughly to ensure that you know how to operate the extensive features and functions of your new appliance safely and efficiently. Because the following operating instructions cover various models, the characteristics of your mini-split may differ slightly from those described in this manual. - Page 4 Safety Information Follow directions. Do NOT attempt. Make sure the machine is grounded to prevent electric shock. Cut off the power supply. Do NOT disassemble. Symbol Meaning Flammable gas flammable materials Refrigerant Refrigerant safety group Safety Group Read operating manual Refer to operating manual Read service manual 4 English...
-
Page 5: Installation
INSTALLATION WARNING Use the power line with the power specifications of the product or higher and use the power line for this appliance only. In addition, do not use an extension line. • Extending the power line may result in electric shock or fire. - Page 6 Safety Information Never install the outdoor unit in a location such as on a high external wall where it could fall. • If the outdoor unit falls, it may result in injury, death or property damage. This appliance must be properly grounded. Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
- Page 7 In winter, if a block of ice falls, it may result in injury, death or property damage. Ensure that the main supply connection is made through a switch that disconnects all poles, with a contact gap of a least 0.12 inch (3 mm). FOR POWER SUPPLY WARNING When the circuit breaker is damaged, contact your...
- Page 8 Safety Information FOR USING WARNING If the appliance is flooded, please contact your nearest service center. • Failing to do so may result in electric shock or fire. If the appliance generates a strange noise,or a burning smell of smoke, cut off the power supply immediately and contact the nearest service center.
- Page 9 the seaside where it is exposed to salt in the air, please contact your nearest service center. Do not touch the circuit breaker with wet hands. • This may result in electric shock. Do not turn the mini-split off with the circuit breaker while it is operating.
- Page 10 Safety Information product. Do not place an object near the outdoor unit that allows children to climb onto the machine. • This may result in children seriously injuring themselves. Do not use this mini-split for long periods in badly ventilated locations or near infirm people. •...
- Page 11 not broken at least once a year. • Failing to do so may result in injury, death or property damage. When the mini-split does not operate properly for cooling or heating, there is a possibility of refrigerant leakage. If there is any leakage, stop operation, ventilate the room, and consult your dealer to recharge the refrigerant.
- Page 12 Safety Information • As well as being harmful to humans, it may also result in electric shock, fire or problems with the product. Do not drink the water from the mini-split. • The water may be harmful to humans. Do not apply a strong impact to the controller and do not disassemble the controller.
-
Page 13: For Cleaning
FOR CLEANING WARNING Do not clean the appliance by spraying water directly onto it. Do not use benzene, thinner, alcohol or acetone to clean the appliance. • This may result in discoloration, deformation, damage, electric shock or fire. Before cleaning or performing maintenance, cut off the power supply and wait until the fan stops. -
Page 14: Preparation
Indoor Unit Overview The appearance of the actual product may differ slightly from the image below. Main parts Room temperature sensor Air filter Air intake (under the panel) Air fl ow blade (up and down) Air fl ow blade Blade pin lever (left and right) (manual) Display Controller receiver... -
Page 15: Controller Overview
Controller Overview 01 Display 02 Power button 03 Mode button 04 AI Comfort button 05 Filter reset button • Press and hold the button for 3 seconds resets the filter cleaning reminder. 06 WindFree button • Although WindFree is displayed on the controller display, it is not available on this model. -
Page 16: Controller Operation
Mini-split operation Initial Settings - Model Selection / Temp. Unit Before using the product, make sure to specify the mini-split model (using the Model Selection menu) and the temperature unit (using the Temp. Unit menu). ▶ Select Initial Settings. ▶ ▶... -
Page 17: Setting Heating Range
Setting Heating Range You can change the temperature setting range to Heat mode. Heating Range ▶ ▶ ▶ Select Settings. operation Select Heating ▶ ▶ ▶ Range. Select Low ▶ ▶ ▶ Ambient. ▶ NOTE • The temperature control range in Heat mode changes 47 ℉ to 86 ℉ (8 ℃... -
Page 18: Operation Modes • Controlling Temperature • Controlling Fan Speed
Mini-split operation Operation modes You can change the current mode between Auto, Cool, Dry, Fan, and Heat by pressing the button. Controlling temperature To control the temperature in each mode, push the [Temp] button up or down: Mode Temperature control Auto/Cool/ Adjust by 1℉... -
Page 19: Controlling Air Flow Direction
Controlling air flow direction You can change the air flow direction by pressing the Temp and Fan buttons. Vertical • 'Standard’ was selected from Model Selection during initial settings ▶ Press button ▶ Select Vertical or Fix. operation Select Horizontal ▶... -
Page 20: Power Smart Features
Power smart features AI Comfort mode Use the AI Comfort mode to learn users’ mini-split use patterns, and automatically adjusts the temperature level and switches Comfort between Cool, Dry modes. ▶ NOTE • AI Comfort mode is available only on indoor units that support this mode. -
Page 21: Auto Mode • Auto Mode Function
Auto mode Use the Auto mode when you want the mini-split to automatically control the mode (Heat or Cool). The mini-split will provide the most Auto comfortable atmosphere that it can. Select ▶ ▶ Auto. NOTE • You can not change the fan speed. •... -
Page 22: Cool Mode • Dry Mode
Power smart features Cool mode Use the Cool mode to stay cool in hot weather. Select Cool ▶ ▶ Cool. NOTE • The proper set temperature range for the Cool mode is 75 ℉ to 79 ℉ (24 ℃ to 26 ℃). •... -
Page 23: Fan Mode • Heat Mode
Fan mode Use Fan mode to run the mini-split like a floor fan, providing a breeze without heating or cooling. Select ▶ ▶ Fan. NOTE • If the mini-split will not be used for an extended period of time, run it in Fan mode for 3 to 4 hours to dry the internal components. -
Page 24: Variety Smart Features
Variety Smart Features Turbo function Turbo Use the Turbo function to provide intensive cooling or heating to sharply decrease or increase indoor temperature within 30 minutes. Cool In Cool or ▶ Heat mode NOTE • After 30-minute operation, the mini-split automatically switches to standard the Cool or Heat mode. -
Page 25: Quiet Function • Long Wind Function
Quiet function Use the Quiet function to reduce operating noise. You can select this function both in the Cool and Heat modes. In Cool or Select ▶ ▶ ▶ Heat mode Quiet. ▶ NOTE • This function can be turned on when 'Standard’ was selected from Model Selection during Initial Settings. -
Page 26: Beep Sound Function • Display Lighting Function • Clearing The Filter-Cleaning Reminder
Variety Smart Features Beep sound function Use the Beep sound function to turn on or off the beep sound that plays when you press a button on the controller. ▶ ▶ Select Settings. ▶ ▶ ▶ Select Beep. ▶ Display lighting function Use the Display lighting function to turn on or off the air purity lighting of the indoor unit display. -
Page 27: Timed On/Timed Off Function
Timed on/Timed off function Use the Timed on/off function to turn the mini-split on or off after a duration. Scheduling durations before the mini-split turns on or off helps use the mini-split economically. Select To set a ▶ ▶ Timer/Good ▶... - Page 28 Variety Smart Features NOTE • You can set the duration to from 30 minutes to 24 hours. • After starting the Timed on function, you can change the mode and the set temperature. When you apply the Timed on/off function to the Fan mode, you cannot change the set temperature.
- Page 29 Timed on/ Timed off function If you set the Timed on function, you can change the mode or temperature while the controller is off. Basic selection Turn On Cool 01:00 Additional selection Turn On 01:00 English...
-
Page 30: Good Sleep Function
Variety Smart Features Good Sleep function Use the Good Sleep function to save energy while you are sleeping. You can select this function in Cool mode. To set a In Cool mode ▶ ▶ ▶ timer Select Timer/Good ▶ ▶ ▶... -
Page 31: Cleaning And Maintenance
Cleaning the Mini-split CAUTION • Before cleaning or performing maintenance, cut-off the power supply and wait until the fan stops. Cleaning the exterior Wipe the surface of the unit with a slightly wet or dry cloth when needed. Wipe off dirt from oddshaped areas by using a soft brush. - Page 32 Cleaning the Mini-split 3.Cleaning the air filter Washable foam based air filter captures large particles from the air. The filter is cleaned with a vacuum or by hand washing. Open the panel and put the Air filter out. Clean the Air filter with a vacuum cleaner or soft brush. If dust is too heavy, rinse it with running water.
-
Page 33: Maintaining The Mini-Split
Maintaining the Mini-split If the mini-split will not be used for an extended period of time, dry the mini-split to maintain in best conditions. 1 Dry the mini-split thoroughly by operating in Fan mode for 3 to 4 hours and then turn off the power. There may be internal damage if moisture is left in components. -
Page 34: Appendix
(with at least 2 GB RAM) and iOS 12.0 or later. The "Settings > Wi-Fi" on your Smartphone app is optimized for iPhone 6s or later and Samsung smartphones (Galaxy S and Note series). • If "Switch to mobile data" or "Adaptive Wi-Fi" is The updates of the SmartThings app or the functions turned on, you cannot connect to the network. - Page 35 Select NOTE You can add a product you want to connect to • If you already have a Samsung account, log in by selecting it manually or by selecting "Scan to the account. If you have a smartphone that nearby".
-
Page 36: Open Source Announcement
AES is recommended. New Wi-Fi authentication specifications and Wi-Fi non-standard authentication methods are not supported. • The product supports the IEEE802.11 b/g/n (2.4 GHz) communication protocol. (Samsung recommends IEEE802.11n.) • If your Internet service provider permanently has registered the MAC address (a unique... -
Page 37: Troubleshooting
Troubleshooting If the mini-split operates abnormally, refer to the following chart to save time and unnecessary expenses. Problem Solution • Check the power status, then operate the mini-split again. • Switch on the circuit breaker, plug in the power cord, then operate the mini-split again. - Page 38 Troubleshooting Problem Solution • Check whether the Fan mode is running. In the Fan mode, the I cannot change the fan speed. mini-split controls the set temperature automatically, and you cannot change the set temperature. • Make sure that nothing is blocking the controller sensor. •...
- Page 39 99% and a message appears saying that adding • If your phone is not a Samsung product, check that Adding device(s) the device has failed. you have entered the wrong Wi-Fi password. Try adding devices again.
-
Page 40: Operation Ranges
Operation Ranges Operating temperature and humidity When using the mini-split follow the operating temperature and humidity ranges. Outdoor Mode Indoor temperature Indoor humidity temperature 64 °F to 90 °F -4 °F to 122 °F Cooling 80% or less (18 °C to 32 °C) (-20 °C to 50 °C) 64 °F to 90 °F -4 °F to 122 °F Drying... -
Page 41: Regulatory Notice
Regulatory Notice FCC Notice FCC CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This appliance contains the transmitter module. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received including... -
Page 42: Fcc Radiation Exposure Statement
Regulatory Notice • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment to an outlet that is on a different circuit than the receiver. • Consult the dealer or an experienced radio/TV technician for help. -
Page 43: Ic Radiation Exposure Statement
IC RADIATION EXPOSURE STATEMENT: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated so there is at least 8 inches (20 cm) between the radiator and your body. This device and its antennas must not be co-located or operated in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. - Page 44 Visit us at www.lennox.com For the latest technical information, www.lennoxcommercial.com Contact us at 1-800-4-LENNOX COUNTRY CALL OR VISIT US ONLINE AT www.lennox.com for homeowners, AMERICA 800-953-6669 www.lennoxpros.com for dealer/contractor...
Need help?
Do you have a question about the LENNOX 3WMD S6-1P Series and is the answer not in the manual?
Questions and answers