Refco REFSCALE-C Instruction Manual page 16

Hold function
A special function of the REFSCALE-C allows you to freeze the value.
This function can be used, for example, when filling or emptying the
system when the gas cylinder is empty or full.
The function is activated by briefly pressing
appears on the display.
To deactivate the function, press again
Alarm
With the REFSCALE-C a programmable alarm value can be set. The
alarm will sound when the required value (either positive for
increasing weight, or negative for decreasing weight) is reached.
After 90% of the programmed value, an approaching alarm brings to
your attention, with an alternating tone, that the required amount is
nearly reached. When reaching 100%, a continuous tone sounds.
1. press
2. press
3. press
4. press
5. press
6. press
triggered
7. press
The alarm value can only be entered as a positive value, but
it counts in positive and negative direction.
If the unit is changed, the programmed value must be reset.
16
, enter the menu
, navigate to alarm
, confirm
, «SET» is displayed
, confirm «SET»
, define the value at which the alarm should be
, confirm value
and the symbol
.
Instruction Manual