Related Manuals for PROCET PT-PCGI-AT
Summary of Contents for PROCET PT-PCGI-AT
- Page 1 PT-PCGI-AT Gigabit PoE to USB-C Adapter Product Technical Manual www.procetpoe.com...
- Page 2 Statement Copyright © 2024 Beijing Innovation Lianjie Network Technology Co., Ltd. All rights reserved. Without the explicit written permission of Beijing Innovation Lianjie Network Technology Co., Ltd., no unit or individual may reproduce, copy, transcribe, or translate any part or all of this manual, nor may it be disseminated for profit in any form (electronic, photocopying, recording, etc.).
- Page 3 Technical Manual Introduction This manual is the technical manual for the PT-PCGI-AT product. It mainly introduces the hardware features, installation methods, and related precautions for this product. The product form of other models may differ, and the product images provided are for illustrative purposes only.
-
Page 4: Table Of Contents
Table of Contents 1. Introduction 1.1 Introduction..............01 1.2 Appearance..............01 1.3 Specification..............03 2. Installation Preparation 2.1 Package contents............04 2.2 Inspection..............04 2.3 Inspection..............04 2.4 Precautions..............06 3. Installation 3.1 Fixed Installation............07 3.2 Post-Installation Inspection........08 Table of Contents... -
Page 5: Introduction
1. Introduction 1.1 Introduction The PT-PCGI-AT is an indoor PoE to USB-C adapter. It receives power and data from an IEEE 802.3at PoE power supply or PoE switch and provides power and network connectivity to USB-C devices via Power Delivery (PD). - Page 6 Top View Fixing Hole label Figure 1-2 Top VIew Side View Figure 1-3 Side View Introduction...
-
Page 7: Specification
1.3 Product Technical Parameters Parameter Description Input 44-57Vdc PoE Power Supply / Switch IEEE 802.3at Input Wire Sequence 4/5(+),7/8(-) or 3/6(+),1/2(-) 5V/2.6A、9V/1.75A、12V/1.45A、15V/1.37A、20V/1.15A Output USB 3.0 USB Standard Network Protocol IEEE802.3 i/u/ab Transmission Rate 10/100/1000Mbps -20℃ to 55℃ Operating Temperature Operating Humidity 20% to 80%, non-condensing Operating Altitude 2000 meters... -
Page 8: Installation Preparation
2. Installation Preparation 2.1 Required Items for Installation The following items are required for installation and are included in the product package: PT-PCGI-AT Instructions 2.2 Preparation of Installation Tools The following tools may be required for installation: Level Marker Knife... - Page 9 Please use Cat5e or higher PoE cables to connect this product. USB-C Device PoE Switch Power Supply And Data Input RJ45 Transmission Distance ≤ 100m PT-PCGI-AT USB-C Port Power And Data Output Figure 2-1 Schematic diagram of connected devices Note：...
-
Page 10: Precautions
2.4 Precautions 1.This device is for indoor use only. 2.For the best experience, use Cat5e or higher PoE cables. 3.The length of the PoE cable connected to the product should not exceed 100 meters. 4.Prolonged use may cause battery swelling or reduced battery capacity in some devices. -
Page 11: Installation
3. Product Installation This product is primarily designed for desktop placement but can also be fixed for installa . 3.1 Fixed Installation Fixed installation ensures stable operation. (1) Drill holes at the selected installation location and secure the product using installation screws, as shown in Figure 3-1. Reserved Hole Screw Fuselage... -
Page 12: Post-Installation Inspection
3.2 Fixed Installation After installation, perform the following checks: Ensure the connected device is functioning properly. Verify that the network cable is correctly connected. Product Installation... - Page 13 When this product reaches the end of its life or cannot be repaired, do not discard it randomly. Please hand it over to a qualified waste electrical and electronic equipment (WEEE) processing company. For proper disposal methods, refer to national or local regulations on WEEE disposal. Qualification Card PASS Creative Lianjie Network Technology Co.Ltd...
Need help?
Do you have a question about the PT-PCGI-AT and is the answer not in the manual?
Questions and answers