Download Print this page

PROCET PT-PCGI-AT User Manual

Hide thumbs Also See for PT-PCGI-AT:

Advertisement

Quick Links

Overview
PT-PCGI-AT is a gigabit PoE to USB-C power and data all-in-one adapter. It allows for the power and data obtained
from an IEEE802.3at PoE injector or PoE switch to convert to USB-C PD. Support your USB-C device has stable wired
network connectivity.
It is enclosed in a high-impact black metal housing with mounting holes on both sides for easy installation. Equipped
with some thermal pads, good heat dissipation, suitable for industrial environments with the working temperature from
-20 degrees Celsius to +50 degrees Celsius. A fixed hole on the top of the USB-C port to 100% fixed the USB-C cable
connector not loose. The device supports a safe voltage input range of 44 to 57 Vdc and provides a maximum power
output of 23W along with 10/100/1000Mbps network data. The effective distance for PoE transmission via Cat5e/Cat6
Ethernet cable is 100 meters.
It is compatible with most USB-C devices in the market. Such as tablets, laptops, cellphones, small PCs/Next Unit of
Computing (NUC) interactive information kiosks, smart monitors, cameras, and so on. Many bands of USB-C devices
were tested, such as Samsung Galaxy Tablets, Microsoft Surface, Apple iPads, Android tablets/smartphones, some
Chrome books, and other USB-C-powered devices consuming up to 23W. When the PoE power is disconnected, the unit
of PT-PCGI-AT will get power from your USB-C device and can work as an Ethernet signal converter to continue
supporting data transfer.
Appearance
Front View
5.6
±1mm
54±1mm
22.4±1mm
4
±1mm
65.4±1mm
Ports
USB-C
output indicator
1mm
3.5mm
Specification
Input
Power Pins
Output
Operating Temp
Operating Altitude
USB Standard
Network Protocol
Data Speed
Dimensions & NW
User Manual for PT-PCGI-AT
18.7±1mm
6.2±1mm
19.6±1mm
PoE
input indicator
11.5mm
16mm
44-57Vdc PoE Injector / Switch IEEE802.3at
USB-C: 5V 2.6A / 9V 1.75A / 12V 1.45A / 15V 1.37A / 20V 1.15A
Upper View
Mounting
bracket
Logo
Tags
31±1mm
Side View
Fuselage screws
PT-PCGI-AT
4/5(+) , 7/8(-) or 3/6(+) , 1/2(-)
-20℃ to 55℃
Up to 2000 Meters
USB 3.0
IEEE802.3i/u/ab
10/100/1000Mbps
90.8mm X 65.4mm X 19.6mm(125g)
65.4±1mm
90.8±1mm

Advertisement

loading
Need help?

Need help?

Do you have a question about the PT-PCGI-AT and is the answer not in the manual?

Questions and answers

Summary of Contents for PROCET PT-PCGI-AT

  • Page 1 Overview PT-PCGI-AT is a gigabit PoE to USB-C power and data all-in-one adapter. It allows for the power and data obtained from an IEEE802.3at PoE injector or PoE switch to convert to USB-C PD. Support your USB-C device has stable wired network connectivity.
  • Page 2 User Manual for PT-PCGI-AT Cautions This device is for indoor use only. For optimal performance of this device, please use Cat5e or Cat6 cables The total Ethernet cable length can not exceed 100 meters. Disconnect the USB-C cable from your USB-C device if it does not need power charged. Because prolonged charging may cause your USB-C devices/Tablets to experience battery swelling or a decrease in battery storage capacity.