TP-Link Archer NX200 User Manual page 12

Chapter 2
2 1 Position Your Router
• The product should not be located in a place where it will be exposed to moisture or
excessive heat.
• Place the router in a location where it can be connected to multiple devices as well as
to a power source.
• Make sure the cables and power cord are safely placed out of the way so they do not
create a tripping hazard.
• The router can be placed on a shelf or desktop.
• Keep the router away from devices with strong electromagnetic interference, such as
Bluetooth devices, cordless phones and microwaves.
• Generally, the router is placed on a horizontal surface, such as on a shelf or desktop.
• Try relocating the router to a spot that may receive a stronger mobile network signal,
such as near a window.
2 2 Connect Your Router
Before you start, turn off your modem, if any, and remove the backup battery if it has
one. And place the router horizontally and orient the antennas vertically.
Follow the steps below to connect your router.
There are two dial-up Internet access methods: dial-up Internet access via Mobile
WAN (SIM card), and dial-up Internet access via EWAN. You don't need to connect both
Mobile WAN (SIM card) and EWAN.
• Method 1: Via Mobile WAN:
1. With the gold contacts facing right, insert the nano SIM card into the slot until you
hear a click.
2. Connect the power adapter to the router and turn on the router.
1
Nano
SIM Card
Connect the Hardware
2
8