McIntosh CR7 Owner's Manual page 12

FIGURE 4
Figure 4 illustrates the interconnection of equip-
ment to provide multiple area control capability for
the system shown in Figure 3. By adding a Mclntosh
R 606 MULTIPLE SENSOR ADAPTER up to six remote
infrared sensors (Mclntosh R 607] can be added. Each
sensor data is fed through the R 606 to the REMOTE
AREA CONTROLLER. Multiple sensors and the R 606
may be used with either the CR7 or CR8, When used
10 CONNECTING
with the CR8 in the Figure 3 example, output of the
R 606 is connected to the SYSTEM SENSOR on the
CR8 and will control only the functions of the CR8.
The CR7 functions will operate normally. Up to 300'
of RG-59/U can be used between the R 606 and the
remote control module, and up to an additional 300'
of RG-59/U between the R 606 and R 607 Remote
Sensors.