Using The Keyboard Screen - Toshiba D-VRW1 Owner's Manual

Editing the disc
Changing a disc name

Using the keyboard screen

This section explains the function of the keyboard
screen and how to input characters. The disc name and
the title name can be changed using the keyboard
screen.
Keyboard screen types
The keyboard screen has three types of "Letters", "Num-
bers" and "Signs". The type can be switched over by
pressing REW or F.FWD.
Letters: This is mainly used for inputting alphabeti-
cal letters.
For the keyboard screen of Letters, see the
previous page.
Numbers: This is used for inputting numbers.
Live Show
RETURN
Letters
Exit
Numbers
< >
Signs
DISPLAY
OK
Signs: This is used for inputting symbols.
Live Show
RETURN
Letters
Exit
Numbers
< >
Signs
DISPLAY
OK
;
Inputting characters
There are two methods for inputting characters.
Character input 1
1
Press , , or
be input.
2
Press ENTER.
The selected character will be input.
74
2G00101A P70-P78
CANCEL
1 2 3
Back
DISPLAY
4 5 6
OK
7 8 9
0
1 2 3 CANCEL
) ! , ? @ # & % / Back
4 5 6 DISPLAY
. * _ - + = [ ] : OK
7 8 9
¨ \ ' < > $ :·) :·( ;-/ :·}
0
Space bar
to select the character to
74
Character input 2
Example: Explained here is the procedure when you
input "F" and "J".
1
Press the numeric keys continuously and select
the character to be input.
To input F, press 3 twice.
NOTE:
When the interval between the pressing numeric keys
is 2 seconds or more in selecting the input character,
the selected character will automatically be input.
2
Stop the key operation when you select the char-
acter to be input.
The selected character will automatically be input.
F
3
Press the numeric keys where the following char-
acter is assigned.
4
When the character to be input is selected, stop
the key operation.
The selected character is automatically input.
Fj
3/7/05, 5:16 PM
3
d
e f
5
j
k l