Sap (Second Audio Program); Setting The Recording; Initial Rec To; Initial Rec Mode - Toshiba D-VRW1 Owner's Manual

Setting the audio / Setting the recording

SAP (Second Audio Program)

This unit is fitted with an SAP broadcast system that
enables you to switch to a second audio program while
viewing a selected channel.
This function applies only when the program is broad-
cast in multiple languages through the SAP broadcast
system.
Select "SAP" and select "ON" to use SAP, and to not
use it, select "OFF".
Listening to SAP
When the unit is turned on or a channel selection is
made, make certain the letters "SAP" appear on the
screen. This means that "Second Audio Program" broad-
casting is available.
This section describes recording settings.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "REC SETUP". For the procedure, see steps
1 to 3 in "Using the SETUP MENU" on page 23.
SETUP MENU
TIMER REC SET
SYSTEM SETUP

INITIAL REC TO

AV SETUP

INITIAL REC MODE

REC SETUP

AUTO CHAPTER

INDEX PICTURE

CH SETUP

BLACK LEVEL (REC)

OTHER
SELECT
ENTER ENTER RETURN
INITIAL REC TO
You can select the recording media that is first displayed
in the item "REC TO" on the timer recording screen.
Select "INITIAL REC TO" and select "DVD" or "VCR".
INITIAL REC MODE
You can select the recording mode that is first displayed in
the item "REC MODE" on the timer recording screen.
Select "INITIAL REC MODE" and select XP , SP, LP, or SLP .
NOTES:
• For the DVD recording mode, see page 52. And for
the VCR recording mode, see page 48.
• Even if you select the recording mode by "INITIAL
REC MODE", the recording mode on the display
window does not change. If you want to change the
recording mode, press REC MODE/SPEED on the
remote control.
2G00101A P22-P32
REC SETUP
DVD
SP
10MIN
0 SEC
Standard
BACK SETUP END
31
AUTO CHAPTER
You can automatically make chapter marks on the DVD
to be recorded.
Select "AUTO CHAPTER" and select the interval be-
tween chapter marks from the below.
OFF: The automatic chapter is not used.
5 MIN: The interval is set to 5 minutes.
10 MIN: The interval is set to 10 minutes.
15 MIN: The interval is set to 15 minutes.
30 MIN: The interval is set to 30 minutes.
INDEX PICTURE
You can set the time that the thumbnail image is regis-
tered in the title menu of DVD-RW (VR mode).
Select "INDEX PICTURE" and select from the below.
0 SEC: The image of a recording start point is regis-
tered.
1 MIN: The image 1 minute after a recording start is
registered.
3 MIN: The image 3 minutes after a recording start
is registered.
NOTE:
You cannot select the thumbnail image for Video mode.
BLACK LEVEL (REC)
You can set the black level for when you record.
Standard : Records at the level of the input
source.
Enhanced : Lowers the level 7.5IRE and records.
The unauthorized recording, use, distribution, or
revision of television programs, videotapes, DVDs
and other materials, is prohibited under the Copy-
right Laws of the United States and other countries,
and may subject you to civil and/or criminal liability.
3/7/05, 5:14 PM
31