Related Manuals for Aussie Traveller SLIDING WINDOW
Summary of Contents for Aussie Traveller SLIDING WINDOW
- Page 1 SLIDING WINDOW INSTALLATION MANUAL READ CAREFULLY BEFORE USING RETAIN MANUAL FOR FUTURE REFERENCE...
-
Page 2: Product Introduction
Black or White frame. The double panes slides both directions with the latches conveniently in the middle of the window. SLIDING WINDOW WALL THICKNESS: 27.5mm to suit wall panel of up to 23.7mm 1300 663 868 | enquiries@aussietraveller.com.au | aussietraveller.com.au... - Page 3 2. The cut-out size required is the window size + 3mm. All Aussie Traveller Windows are sold as cutout size dimensions. Height x Width.
-
Page 4: Installation
INSTALLATION 1. Pre-drill the screw fixing holes on the front of the frame. Ensure these holes will line up with any wall structure for a good solid installation. When drilling the screw holes make sure not to drill through the black seal on the back of the window frame This seal must stay intact. - Page 5 INSTALLATION (cont.) 5. Put a small amount of silicone into each of the predrilled holes to further help with water seal. We recommend a neutral cure silicone to be used. 6. Fix with screws. We recommend using either Philips round head screw or rivets.
-
Page 6: Warranty Statement
Warranty will commence at the time the final retail customer makes payment for the Product to the wholesale purchaser. 3. If the Product is purchased directly from Aussie Traveller for use by final retail customer and not to be on sold in any way, the Warranty will commence at the time of the original purchase. - Page 7 If such inspection and testing find no defect in the Product, the final retail customer must pay Aussie Traveller’s usual costs of service work and testing. The final retail customer must bear the cost of the transport of the Product to and from Aussie Traveller or the authorised repair agent, and all insurance of the Product.
Need help?
Do you have a question about the SLIDING WINDOW and is the answer not in the manual?
Questions and answers