Related Manuals for Aussie Traveller WIND-OUT WINDOW
Summary of Contents for Aussie Traveller WIND-OUT WINDOW
- Page 1 WIND-OUT WINDOW INSTALLATION MANUAL READ CAREFULLY BEFORE USING RETAIN MANUAL FOR FUTURE REFERENCE...
-
Page 2: Product Introduction
Incorrect use or operation may cause serious injury. PRODUCT INTRODUCTION Protect your caravan window by installing an Aussie Traveller Protector Shade. Install the shade onto your existing Wind-out Window or to your Protector Shade Mounting Rail (sold separately). Available in a curved or flat design in 3 colourways, the shade protector is features a laminated aluminium outer skin, painted steel inner skin and aluminium frame. - Page 3 2. The cutout size required is the window size + 4mm. All Aussie Traveller Windows are sold as cutout size dimensions. Height x Width.
-
Page 4: Installation
INSTALLATION 1. On the back of the window, either run a wide bead of silicone or fix foam seal to the window frame. This will help to water seal the window once installed. We recommend a neutral cure silicone to be used. -
Page 5: Warranty Statement
Warranty will commence at the time the final retail customer makes payment for the Product to the wholesale purchaser. 3. If the Product is purchased directly from Aussie Traveller for use by final retail customer and not to be on sold in any way, the Warranty will commence at the time of the original purchase. - Page 6 If such inspection and testing find no defect in the Product, the final retail customer must pay Aussie Traveller’s usual costs of service work and testing. The final retail customer must bear the cost of the transport of the Product to and from Aussie Traveller or the authorised repair agent, and all insurance of the Product.
Need help?
Do you have a question about the WIND-OUT WINDOW and is the answer not in the manual?
Questions and answers