Server Chassis Features - Supero AS-4041M-82R User Manual

Onboard Controllers/Ports
One fl oppy drive controller and one onboard ATA/100 controller are provided to
support up to two IDE hard drives or ATAPI devices. The color-coded I/O ports
include one COM port, a VGA (monitor) port, two USB 2.0 ports, PS/2 mouse and
keyboard ports, a parallel port and two gigabit Ethernet ports.
ATI Graphics Controller
The H8QME-2/H8QM8-2 features an integrated ATI video controller based on the
ES1000 graphics chip. The ES1000 was designed specifi cally for servers, featuring
low power consumption, high reliability and superior longevity.
Other Features
Other onboard features that promote system health include onboard voltage moni-
tors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU
overheat sensors, virus protection and BIOS rescue.
1-3

Server Chassis Features

The AS4041M-T2R/4041M-82R is a high-end, scaleable server platform built upon
the SC748TQ-R1000/SC748S-R1000 tower/4U server chassis. The following is
a general outline of the main features of the SC748TQ-R1000/SC748S-R1000
chassis.
System Power
The SC748TQ-R1000/SC748S-R1000 features a redundant 1000W power supply
consisting of two power modules. The system does not need to be shut down when
replacing or removing a single power supply module.
SATA/SCSI Drives
The SC748TQ-R1000/SC748S-R1000 chassis was designed to support fi ve SATA
(4041M-T2R) or SCSI (4041M-82R) hard drives, which are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the SATA/SCSI drives.
Chapter 1: Introduction
1-3