Serverboard Features - Supero AS-4041M-82R User Manual

AS4041M-T2R/4041M-82R User's Manual
1-2

Serverboard Features

At the heart of the 4041M-T2R/4041M-82R lies the H8QME-2/H8QM8-2, a quad
processor serverboard based on the nVidia MCP55 Pro and AMD-8132 chipsets.
Below are the main features of the H8QME-2/H8QM8-2 (see Figure 1-1 for a block
diagram of the chipset).
Processors
The H8QME-2/H8QM8-2 supports dual or quad AMD Socket F type processors.
Please refer to the serverboard description pages on our web site for a complete
listing of supported processors.
Memory
The H8QME-2/H8QM8-2 has sixteen 240-pin DIMM slots supporting up to 32 GB
of registered ECC DDR2-667/533 or 64 GB of registered ECC DDR2-400 SDRAM.
The memory is supported on both interleaved and non-interleaved confi gurations.
Please refer to Section 5-5 for details.
Serial ATA Subsystem
An on-chip (MCP55) SATA controller is integrated into the H8QME-2/H8QM8-2 to
provide a six-port, 3 Gb/sec Serial ATA subsystem, which is RAID 0, 1, 0+1, 5 and
JBOD supported. The SATA drives are hot-swappable units. Note: The operating
system you use must have RAID support to enable the hot-swap capability and
RAID function of the Serial ATA drives.
SCSI Subsystem (4041M-82R)
The H8QME-2 includes an onboard Adaptec AIC-7902 dual-channel SCSI controller,
which supports four 80-pin SCA Ultra320 SCSI hard drives. (Standard 1" drives
are supported. SCA = Single Connection Attachment.) The SCSI drives are con-
nected to an SCA backplane that provides power, bus termination and confi guration
settings. The SCSI drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the Serial ATA drives.
PCI Expansion Slots
The H8QME-2/H8QM8-2 has one PCI-Express x16 slot, one PCI-Express x8 slot,
two PCI-X 133 MHz slots and two PCI-X 100 MHz slots. See Section 5-6 for
details.
1-2