Auto Program - SOYO DYLT3280 User Manual

7-5 Auto Program Settings
(1) Press the (MENU) button on the Panel or
on the Remote Control to enter the Main
Menu and press the (
Remote Control or (-VOL+) on the panel
to select "TV" settings.
(2) Press the (OK) button to enter "TV" set-
tings.
(3) Press the ( ) button on the Remote
Control or (-PROG+) on the panel to se-
lect the "AUTO PROGRAM" option.
(4) Press the (OK) button to enter "AUTO
PROGRAM" settings. To skip blank chan-
nels, it is recommended that you perform
Auto Program at least once (TV channels
and CATV channels are two independent
systems, kindly perform Auto Program
once for each system).
(5) To continue setting other "TV" sub-items,
press the ( ) button on the Remote
Control or (-PROG+) on the panel to
select the desired option. After setting
is complete, press the (MENU) button to
return to the Main Menu.
Note: While performing Auto Program, you
can stop the auto scanning anytime
by pressing the (OK) button and
exit this function. However, the
scanned channels are still added
into the memory automatically.
) button on the
35 35