Profiles - Sony Ericsson Walkman W350a User Manual

To add a code
1 From standby select
> Code memo.
2 Enter a passcode and select
> Add.
3 Enter a name associated with the code
and select Continue.
4 Enter the code and select Done.
To change a passcode
1 From standby select
> Code memo.
2 Enter your passcode and select
> Change passcode.
3 Enter your new passcode and select
Continue.
4 Re-enter the new passcode and select
Continue.
5 Enter a checkword and select Done.
Forget your passcode?
If you forget your passcode, you must
reset the code memo. This means that
all entries in the code memo are
deleted. The next time you enter the
code memo, you must proceed as
if you are opening it for the first time.
See To open code memo for the first
time on page 59.
60 More features
This is the Internet version of the User guide. © Print only for private use.
Menu > Organizer
New code
Menu > Organizer
More
To reset code memo
1 From standby select
> Code memo.
2 Enter any passcode to access the code
memo. The checkword and codes that
are then shown are incorrect.
3 Select More > Reset.
4 Reset code memo?
5 Select Yes.

Profiles

Profiles automatically adapt your phone
to different situations, for example,
while in a meeting or when driving.
Some profiles settings, for example,
ring volume may be adjusted
automatically to suit a certain area
or accessory. You can reset all profile
settings to how they were set when
you bought your phone.
To select a profile
1 From standby select
> the General tab > Profiles.
2 Select a profile.
To view and edit a profile
1 From standby select
> the General tab > Profiles.
2 Scroll to a profile and select
View and edit.
You cannot rename the Normal profile.
Menu > Organizer
appears.
Menu > Settings
Menu > Settings
More >