Milwaukee MW803 User Manual

ACCESSORIES
MI60P Replaceable probe for MW803 & MW804
M10030B 12.88 mS/cm calibration solution, 20 ml
sachet, 25 pcs
1413 µS/cm calibration solution, 20 ml
M10031B
sachet, 25 pcs
1382 ppm TDS Calibration Solution, 20 ml
M10032B
sachet, 25 pcs.
6.44 ppt TDS Calibration, 20 ml sachet,
M10038B
25 pcs.
12.88 mS/cm calibration solution, 230 ml
MA9060
bottle
1413 µS/cm calibration solution, 230 ml
MA9061
bottle
1382 ppm TDS Calibration Solution,
MA9062
230 mL bottle
M10016B Cleaning solution, 20 ml sachet, 25 pcs
M10000B Rinse solution, 20 ml sachet, 25 pcs
M10004B pH 4.01 buffer, 20 ml sachet, 25 pcs.
M10007B pH 7.01 buffer, 20 ml sachet, 25 pcs.
M10010B pH 10.01 buffer, 20 ml sachet, 25 pcs.
MA9004 pH 4.01 buffer, 230 ml bottle
MA9007 pH 7.01 buffer, 230 ml bottle
MA9010 pH 10.01 buffer, 230 ml bottle
MA9006 pH 6.86 buffer, 230 ml bottle
MA9009 pH 9.18 buffer, 230 ml bottle
MA9015 Electrode storage solution, 230 ml
CERTIFICATION
Milwaukee Instruments conform to the CE European
Directives.
Disposal of Electrical & Electronic Equipment. Do not
treat this product as household waste. Hand it over to the
appropriate collection point for the recycling of electrical
and electronic equipment.
Disposal of waste batteries. This product contains
batteries. Do not dispose of them with other household
waste. Hand them over to the appropriate collection
point for recycling.
Please note: proper product and battery disposal
prevents potential negative consequences for human
health and the environment. For detailed information,
contact your local household waste disposal service or
go to www.milwaukeeinstruments.com (USA & CAN)
or www.milwaukeeinst.com.
SPECIFICATIONS
0.00 to 14.00 pH
0 to 3999 µS/cm (MW803)
0 to 2000 ppm (MW803)
Range
0.00 to 20.00 mS/cm (MW804)
0.00 to 10.00 ppt (MW804)
0.0 to 50.0 °C / 32.0 to 122.0 °F
0.01 pH
1 µS/cm / 1 ppm (MW803)
Resolution
0.01 mS/cm / 0.01 ppt (MW804)
0.1 °C / 0.1 °F
0.05 pH
Accuracy (@25°C) 2% FS (EC/TDS)
0.5 °C / ±1 °F
TDS Factor 0.45 to 1.00 (CONV)
Temperature
Automatic, with ß=0.0 to 2.4%/°C
Compensation
Automatic, 1 point for EC and 1 or
Calibration
2 points for pH
Probe
MI60P
Replaceable
Environment 0 to 50 °C; 100% RH max.
Battery Type 4 x 1.5V; IEC LR44, A76
Battery Life Approx. 100 hours of use
Auto-off After 8 min. of non-use
Dimensions /
200 x dia 38 mm / 100 g
Weight
RECOMMENDATION
Before using this product, make sure it is entirely suitable
for your specific application and for the environment in
which it is used. Any modification introduced by the user
to the supplied equipment may compromise the meter's
performance. For your and the meter's safety do not use
or store the meter in hazardous environment. To avoid
damage or burn, do not perform any measurement in
microwave ovens.
WARRANTY
These instruments are warranted against defects in
materials and manufacturing for a period of 2 years
from the date of purchase. Probe is warranted for
6 months. This warranty is limited to repair or free
of charge replacement if the instrument cannot be
repaired. Damage due to accidents, misuse, tampering
or lack of prescribed maintenance is not covered by
warranty. If service is required, contact your local
Milwaukee Instruments Technical Service. If the repair is
not covered by the warranty, you will be notified of the
charges incurred. When shipping any meter, make sure it
is properly packaged for complete protection.
Milwaukee Instruments reserves the right to make
improvements in design, construction and appearance of its
products without advance notice.
ISTMW803 07/20
USER MANUAL
MW803 & MW804
PRO Waterproof
pH/EC/TDS/Temp
milwaukeeinstruments.com (USA & CAN)
SATISFACTION
GUARANTEED
Testers
milwaukeeinst.com