Milwaukee MW804 User Manual

ACCESSORIES

MI60P Replaceable probe for MW803 & MW804
12.88 mS/cm calibration solution, 20 ml
M10030B
sachet, 25 pcs
1413 S/cm calibration solution, 20 ml
M10031B
sachet, 25 pcs
1382 ppm TDS Calibration Solution, 20 ml
M10032B
sachet, 25 pcs.
6.44 ppt TDS Calibration, 20 ml sachet,
M10038B
25 pcs.
12.88 mS/cm calibration solution, 230 ml
MA9060
bottle
1413 S/cm calibration solution, 230 ml
MA9061
bottle
1382 ppm TDS Calibration Solution,
MA9062
230 mL bottle
M10016B Cleaning solution, 20 ml sachet, 25 pcs
M10000B Rinse solution, 20 ml sachet, 25 pcs
M10004B pH 4.01 bu er, 20 ml sachet, 25 pcs.
M10007B pH 7.01 bu er, 20 ml sachet, 25 pcs.
M10010B pH 10.01 bu er, 20 ml sachet, 25 pcs.
MA9004 pH 4.01 bu er, 230 ml bottle
MA9007 pH 7.01 bu er, 230 ml bottle
MA9010 pH 10.01 bu er, 230 ml bottle
MA9006 pH 6.86 bu er, 230 ml bottle
MA9009 pH 9.18 bu er, 230 ml bottle
MA9015 Electrode storage solution, 230 ml

CERTIFICATION

Milwaukee Instruments conform to the CE European
Directives.
Disposal of Electrical & Electronic Equipment. Do not
treat this product as household waste. Hand it over to the
appropriate collection point for the recycling of electrical
and electronic equipment.
Disposal of waste batteries. This product contains
batteries. Do not dispose of them with other household
waste. Hand them over to the appropriate collection
point for recycling.
Please note: proper product and battery disposal
prevents potential negative consequences for human
health and the environment. For detailed information,
contact your local household waste disposal service or
go to www.milwaukeeinstruments.com (USA & CAN)
or www.milwaukeeinst.com.

SPECIFICATIONS

0.00 to 14.00 pH
0 to 3999 S/cm (MW803)
0 to 2000 ppm (MW803)
Range
0.00 to 20.00 mS/cm (MW804)
0.00 to 10.00 ppt (MW804)
0.0 to 50.0 °C / 32.0 to 122.0 °F
0.01 pH
1 S/cm / 1 ppm (MW803)
Resolution
0.01 mS/cm / 0.01 ppt (MW804)
0.1 °C / 0.1 °F
0.05 pH
Accuracy (@25°C) 2% FS (EC/TDS)
0.5 °C / ±1 °F
TDS Factor 0.45 to 1.00 (CONV)
Temperature
Automatic, with ß=0.0 to 2.4%/°C
Compensation
Automatic, 1 point for EC and 1 or
Calibration
2 points for pH
Probe
MI60P
Replaceable
Environment 0 to 50 °C; 100% RH max.
Battery Type 4 x 1.5V; IEC LR44, A76
Battery Life Approx. 100 hours of use
Auto-o After 8 min. of non-use
Dimensions /
200 x dia 38 mm / 100 g
Weight

RECOMMENDATION

Before using this product, make sure it is entirely suitable
for your specific application and for the environment in
which it is used. Any modification introduced by the user
to the supplied equipment may compromise the tester's
performance. For your and the tester's safety do not use
or store the tester in hazardous environment. To avoid
damage or burn, do not perform any measurement in
microwave ovens.

WARRANTY

These instruments are warranted against defects in
materials and manufacturing for a period of 2 years from
the date of purchase. Probe is warranted for 6 months.
This warranty is limited to repair or free of charge
replacement if the instrument cannot be repaired.
Damage due to accidents, misuse, tampering or lack
of prescribed maintenance is not covered by warranty.
If service is required, contact your local Milwaukee
Instruments Technical Service. If the repair is not covered
by the warranty, you will be notified of the charges
incurred. When shipping any instrument, make sure it is
properly packaged for complete protection.
Milwaukee Instruments reserves the right to make
improvements in design, construction and appearance of its
products without advance notice.
ISTMW803 11/20
USER MANUAL
MW803, MW804
MAX Waterproof 4-in-1
pH/EC/TDS/Temperature
Unit 4, 3 Neutron Place Rowville, VIC 3178 Australia
1300 662 720 | sales@pacificsensortech.com.au
SATISFACTION
GUARANTEED
Testers
Distributor in Australia
Pacific Sensor Technologies Pty Ltd
www.pacificsensortech.com.au