Related Manuals for Zendure AB2000X
Summary of Contents for Zendure AB2000X
- Page 1 Add-on Battery AB2000X User Manual / Bedienungsanleitung / Manuel d'utilisation / Manuale d'uso / Manual de usuario / Gebruikershandleiding...
- Page 2 Users take full responsibility for the safe usage and operation of this product. Familiarize yourself with relevant regulations in your area. You are solely responsible for being aware of all relevant regulations and using Zendure products in a compliant way. Content 1.
- Page 3 1. Specification Add-on Battery AB2000X Battery Rated Voltage 48V d.c. Battery Life Cycle 6,000 Cycles Rated Capacity 40Ah/1920Wh Rechargeable Li-Ion Battery LiFePO ₄ One AB2000X Battery:1,680W Maximum Input/Output Power Two or More Batteries:1,920W Charging Temperature 0° C ~55° C (32° F ~ 131° F) Discharging Temperature -20°...
- Page 4 10. During the operation of the solar energy system, avoid direct sunlight to prevent the product from overheating. Do not place the product near any heat source. 11. Please install the product according to our user manual to avoid damage to the product or injury to other people.
- Page 5 3. Important Tips Protect from Direct Sunlight: Ensure that the AB2000X is placed in a shaded area to avoid rapid temperature increases that could affect performance. Accessory Check: Verify the necessary accessories before installation, as some may need to be purchased separately.
- Page 6 4. What’s in the Box Add-on Battery AB2000X User Manual Product and component images may differ from actual products. If any parts are missing or defective, please contact Zendure customer support. 5. Product Overview the bottom 1. Top Battery Port: Connects to SolarFlow 800, Hub 1200, Hub 2000, Ace 1500, Hyper 2000, and Add-on Batteries.
- Page 7 You can take the following steps to address the issue. • If there is no solar connection or sunlight during installation, the AB2000X might be out of power. Do not disconnect the battery connection cable. Instead, solar input or open AC input mode, and then check the battery indicator again.
- Page 8 A single SolarFlow 800 can be connected up to 6 AB2000X batteries, which can maximally reach to 11.52kWh capacity. The Hub1200/2000 connect to up to 4 batteries, reach to 7.68kWh.
- Page 9 A Hyper 2000/ ACE 1500 can be connected to up to 4 AB2000X batteries, reaching a maximum capacity of 7.68kWh. The SolarFlow 800 Pro connect to up to 5 batteries. Tips: • Battery Disconnection: Do not disconnect the batteries during the charging or discharging process. If disconnection is necessary, ensure that the power of the inverter is turned off.
- Page 10 In accordance with applicable laws and recreations, Zendure retains the final right to interpret this document and all related product documents, including but not limited to warranty periods, eligibility for warranty services, and other terms. Zendure also reserves the right to modify these documents in response to product updates.
- Page 11 Help Center/Claim the Product Warranty Please scan the QR code to visit the Zendure Help Center or claim the product warranty. Scannen Sie den QR-Code, um das Help Center zu besuchen oder Ihre Garantie zu aktivieren. Scannez le QR code pour accéder au centre d'assistance ou activer la garantie de votre produit.
Need help?
Do you have a question about the AB2000X and is the answer not in the manual?
Questions and answers