Profi Cook PC-FR 1296 H Instruction Manual page 12

Selecting Single or Combination Operation
After you have switched on the appliance, the buttons for
activating the control panels appear.
• If you want to use the left fryer, activate it with the
button. The control panel for the left-hand fryer
L
appears. The automatic programmes appear on the
display.
• If you want to use the right-hand fryer, activate it with the
button. The control panel for the right-hand fryer
appears. The automatic programmes appear on the
display.
• To operate both fryers at the same time, press both the
button and the button.
L
Setting the Temperature and Cooking Time
A programme must first be selected for the
to appear.
• Set the temperature (80 °C – 200 °C) with the
For the "Drying" automatic programme, 30 – 100 °C.
• Set the cooking time (1 – 60 minutes) with the button .
For the "Drying" automatic programme 1 – 24 hours.
• The display alternates between the temperature and the
cooking time.
Starting / Interrupting the Cooking Process
• Use the button to start and interrupt the cooking
process (see chapter "Operation"
operation").
Synchronised switch-off (SYNC FINISH)
The button allows you to prepare two different foods
with different cooking times at the same time.
• After pressing the button, set the desired automatic
programme, temperature and cooking time on both
sides.
• Start the programme with the
The control panel with the shorter cooking time
displays . This programme does not start until the
longer cooking time has reached the shorter cooking
time.
Automatic Programmes
Select an automatic programme by pressing the symbol for
that programme.
The following temperatures in degrees Celsius (°C) and
times in minutes (min) are preset for the programmes:
Symbol Programmes
French fries
Chicken wings
12
PC-FR1296H_IM
/ symbols
• The pre-set temperatures and cooking times are only
button.
• Also observe the information on the food packaging.
• You can also adjust the pre-set temperature and cooking
"Interrupting
1. Pull the deep-frying containers out of the appliance by
2. If necessary, place the sieve inserts with the silicone
3. Push the deep-frying containers back into the appliance.
4. Plug the appliance into a properly installed earthed
button.
5. Press the
6. Select one deep fryer (single mode) or both deep fryers
7. We recommend preheating the appliance for approx.
8. Press the
9. After the time has elapsed, 3 signals sound and the
10. Pull the deep-frying containers out of the appliance by
°C min
11. Fill the deep-frying containers with the desired food.
12. Push the deep-frying containers back into the appliance.
200 28
13. Switch the appliance on again with the
200 20
Symbol Programmes
Seafood
Bacon
Meat
Cake, muffins etc.
Vegetables
Drying
guidelines. The cooking time and temperature may be
longer and higher or shorter and lower depending on the
size and weight.
time of the automatic programmes.
Operation
the handles.
knobs in the deep-frying containers. Push the sieve
inserts all the way down.
They must lock into place.
socket. A beep sounds and all the symbols light up
briefly. The button lights up.
button to switch on the appliance.
(combined mode).
3 minutes. To do this, set the required temperature and
cooking time to 3 minutes.
button to start the heating phase.
appliance switches to standby mode.
the handle. Place them on a heat-resistant surface.
°C min
180 18
180 6
180 25
180 12
160 17
65 8 hrs.
button.
07.08.24