Hoffer Flow Controls CAT3-AC-MIL User Manual page 3

NOTICE
HOFFER FLOW CONTROLS, INC. makes no warranty of any kind with regard to this
material, including, but not limited to, the implied warranties of merchantability and
fitness for a particular purpose.
This manual has been provided as an aid in installing, connecting, calibrating, operating, and
servicing this unit. Every precaution for accuracy has been taken in the preparation of this
manual; however, HOFFER FLOW CONTROLS, INC. neither assumes responsibility
for any omissions or errors that may appear nor assumes liability for any damages that
may result from the use of the products in accordance with information contained in the
manual.
HOFFER FLOW CONTROLS' policy is to provide a user manual for each item supplied.
Therefore, all applicable user manuals should be examined before attempting to install or
otherwise connect a number of related subsystems.
During installation, care must be taken to select the correct interconnecting wiring drawing.
The choice of an incorrect connection drawing may result in damage to the system and/or one
of the components.
Please review the complete model number of each item to be connected and locate the
appropriate manual(s) and/or drawing(s). Identify all model numbers exactly before making
any connections. A number of options and accessories may be added to the main instrument,
which are not shown on the basic user wiring. Consult the appropriate option or accessory
user manual before connecting it to the system. In many cases, a system wiring drawing is
available and may be requested from HOFFER FLOW CONTROLS.
This document contains proprietary information, which is protected by copyright. All
rights are reserved. No part of this document may be photocopied, reproduced, or
translated to another language without the prior written consent of HOFFER FLOW
CONTROLS, INC.
HOFFER FLOW CONTROLS' policy is to make running changes, not model changes,
whenever an improvement is possible.
technology and engineering. The information contained in this document is subject to
change without notice.
Direct all warranty and repair requests/inquiries to the Hoffer Flow Controls Customer
Service Department, telephone number (252) 331-1997 or 1-800-628-4584. BEFORE
RETURNING ANY PRODUCT(S) TO HOFFER FLOW CONTROLS, PURCHASER
MUST OBTAIN A RETURNED MATERIAL AUTHORIZATION (RMA) NUMBER
FROM HOFFER FLOW CONTROLS' CUSTOMER SERVICE DEPARTMENT (IN
ORDER TO AVOID PROCESSING DELAYS). The assigned RMA number should then
be marked on the outside of the return package and on any correspondence.
FOR WARRANTY RETURNS, please
have the following information available
BEFORE contacting HOFFER FLOW
CONTROLS:
1. P.O. number under which the
product was PURCHASED,
2. Model and serial number of the
product under warranty, and
3. Repair instructions and/or specific
problems relative to the product.
HFC 9708
This affords our customers the latest in
Return Requests / Inquiries
FOR NON-WARRANTY REPAIRS OR
CALIBRATIONS, consult HOFFER FLOW
CONTROLS for current repair/ calibration
charges. Have the following information
available BEFORE contacting HOFFER
FLOW CONTROLS:
1.
2.
3.
P.O. number to cover the COST of the
repair/calibration,
Model and serial number of the
product and
Repair instructions and/or specific
problems relative to the product.