Assembling Your Food Processor
1. Before using your food processor for
the first time, wash the work bowl,
work bowl cover, mini bowl, feed
tube pusher and blades either by
hand or in the dishwasher, see Care
and Cleaning, page 18.
2. Uncoil needed length of cord from
storage area beneath power base.
Place power base on a dry level
counter with the controls facing
forward. Do not plug unit in until
3. Place work bowl on power base,
fitting the center opening over the
power base shaft, making sure the
handle is just to the left of center.
4. Grasp the work bowl handle and turn
to the right until it locks into position.